load-bootloader.log

> Executing task in folder stm32bluepill-mynewt-sensor: bash -c -l ' openocd/bin/openocd -f scripts/flash-init.ocd -f interface/stlink-v2.cfg -f target/stm32f1x.cfg -f scripts/flash-boot.ocd ' <

Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 0
Setting flash size to 64 KB...
0x10000
adapter speed: 1000 kHz
adapter_nsrst_delay: 100
none separate
semihosting is enabled
Stopping Blue Pill...
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x0800010c msp: 0x20005000, semihosting

Current flash info...
#0 : stm32f1x.flash (stm32f1x) at 0x08000000, size 0x00000000, buswidth 0, chipwidth 0
flash 'stm32f1x' found at 0x08000000

Erasing Blue Pill...
stm32x mass erase complete

Unlocking Blue Pill...
target halted due to breakpoint, current mode: Thread 
xPSR: 0x61000000 pc: 0x2000003a msp: 0x20005000, semihosting
stm32x unlocked.
INFO: a reset or power cycle is required for the new settings to take effect.

Flashing Bootloader to Blue Pill...
auto erase enabled
auto unlock enabled
target halted due to breakpoint, current mode: Thread 
xPSR: 0x61000000 pc: 0x2000003a msp: 0x20005000, semihosting
wrote 12288 bytes from file bin/targets/bluepill_boot/app/apps/boot/boot.elf.bin in 0.797764s (15.042 KiB/s)
read 12204 bytes from file bin/targets/bluepill_boot/app/apps/boot/boot.elf.bin and flash bank 0 at offset 0x00000000 in 0.260874s (45.685 KiB/s)
contents match

Restarting Blue Pill...
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x0800010c msp: 0x20005000, semihosting

**** Done!