JKBMS B2A24S15P & v1.0.20230531 Never switches to FLOAT

[BipedalPrimate]

As I understand it, the following parameters in config.ini (full file attached as config.ini.txt below) determine when to switch to Float:

MAX_CELL_VOLTAGE = 3.450
FLOAT_CELL_VOLTAGE = 3.350
CVCM_ENABLE = False (Started with this set to True but never achieved 55.2v because of initially unbalanced pack - now balanced)
CELL_VOLTAGE_DIFF_KEEP_MAX_VOLTAGE_UNTIL = 0.010
CELL_VOLTAGE_DIFF_TO_RESET_VOLTAGE_LIMIT = 0.160
MAX_VOLTAGE_TIME_SEC = 600 (note that I have tried setting this to 1 sec)
SOC_LEVEL_TO_RESET_VOLTAGE_LIMIT = 90

It appears that all of these conditions have been met on a number of occasions yet Float is never achieved.

Am I missing something? If so, what?

config.ini.txt

[BipedalPrimate]

Incorrectly submitted in Discussions

[mr-manuel]

Duplicate of #927