diff --git a/docs/Sensor/SeeedStudio_XIAO_Gadgets/2_Channel_Wi_Fi_AC_Relay_Module.md b/docs/Sensor/SeeedStudio_XIAO_Gadgets/2_Channel_Wi_Fi_AC_Relay_Module.md
index 719a6d04abea..eae8829550a6 100644
--- a/docs/Sensor/SeeedStudio_XIAO_Gadgets/2_Channel_Wi_Fi_AC_Relay_Module.md
+++ b/docs/Sensor/SeeedStudio_XIAO_Gadgets/2_Channel_Wi_Fi_AC_Relay_Module.md
@@ -175,6 +175,9 @@ With either method, you'll have your firmware updated and ready for integration
 
 1. **Enable Access Point**:
    - Upon powering up for the first time, the module will create a Wi-Fi network (SSID: `seeedstudio-relay`).
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/XIAO/Gadgets/2_channel_ac_relay/2ch_relay_wifi_list.png" style={{width:680, height:'auto', "border-radius": '15px'}}/></div>
+
 2. **Access Configuration**:
    - Connect to the network using a phone or PC.
    - Open a browser and navigate to `http://192.168.4.1`.
@@ -199,6 +202,8 @@ This way, you can connect the module to your Home Assistant network and let Home
 
 After adding the device, you can see both switches in the Overview page. You can also set the name of each switch individually.
 
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/XIAO/Gadgets/2_channel_ac_relay/ha_switch_overview.png" style={{width:680, height:'auto', "border-radius": '15px'}}/></div>
+
 ## Safety and Maintenance
 
 1. Periodically inspect wiring for wear and tear.
diff --git a/docs/Sensor/SeeedStudio_XIAO_Gadgets/6_Channel_Wi_Fi_Relay_Module.md b/docs/Sensor/SeeedStudio_XIAO_Gadgets/6_Channel_Wi_Fi_Relay_Module.md
index 350c7c3c6464..1d338ee6f532 100644
--- a/docs/Sensor/SeeedStudio_XIAO_Gadgets/6_Channel_Wi_Fi_Relay_Module.md
+++ b/docs/Sensor/SeeedStudio_XIAO_Gadgets/6_Channel_Wi_Fi_Relay_Module.md
@@ -127,14 +127,6 @@ Voltages exceeding 24V may cause electric shock or burns, especially in cases of
 
 By gathering the necessary components and setting up Home Assistant with the ESPHome add-on, you'll be ready to proceed with the integration of the 6-Channel relay module.
 
-:::tip install Home Assistant
-We have also written how to install Home Assistant for some of Seeed Studio products, please refer to them.
-
-- [Getting Started with Home Assistant on ODYSSEY-X86](/ODYSSEY-X86-Home-Assistant)
-- [Getting Started with Home Assistant on reTerminal](/reTerminal_Home_Assistant)
-- [Getting Started with Home Assistant on LinkStar H68K/reRouter CM4](/h68k-ha-esphome)
-:::
-
 ### Step 2: Preparing the Relay Module
 
 By default, your device (XIAO ESP32C6) comes pre-flashed with firmware for 6-Channel relay. However, there are two scenarios where you may need to update the firmware:
@@ -178,9 +170,9 @@ With either method, you'll have your firmware updated and ready for integration
 ### Step 3: Network Configuration
 
 1. **Enable Access Point**:
-   - Upon powering up for the first time, the module will create a Wi-Fi network (SSID: `seeedstudio-6-channel-relay`).
+   - Upon powering up for the first time, the module will create a Wi-Fi network (SSID: `seeedstudio-2-channel-relay`).
 
-<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/XIAO/Gadgets/6_channel_wifi_relay/ap-from-xiao-esp32c6-seeedstudio-6-channel-relay.png" style={{width:680, height:'auto', "border-radius": '15px'}}/></div>
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/XIAO/Gadgets/2_channel_ac_relay/2ch_relay_wifi_list.png" style={{width:680, height:'auto', "border-radius": '15px'}}/></div>
 
 2. **Access Configuration**:
    - Connect to the network using a phone or PC.