config_bits.h

/* 
 * File:   configbits.h
 * Author: Sammy Guergachi <sguergachi at gmail.com>
 *
 * Created on January 31, 2014, 5:22 PM
 */

#ifndef CONFIGBITS_H
#define	CONFIGBITS_H

#ifdef	__cplusplus
extern "C" {
#endif

// PIC32MX795F512L Config Bits

// DEVCFG3
//#pragma config USERID    =
#pragma config FSRSSEL   = PRIORITY_7   // SRS Select (SRS Priority 7)
#pragma config FMIIEN    = OFF          // Ethernet RMII/MII Enable (MII disabled)
#pragma config FETHIO    = OFF          // Ethernet I/O Pin Select (Default Ethernet I/O)
#pragma config FCANIO    = OFF          // CAN I/O Pin Select (Default CAN I/O)
#pragma config FUSBIDIO  = ON           // USB USID Selection (Controlled by the USB Module)
#pragma config FVBUSONIO = OFF          // USB VBUS ON Selection (Controlled by USB Module)

// DEVCFG2
#pragma config FPLLIDIV  = DIV_4        // PLL Input Divider (4x Divider)
#pragma config FPLLMUL   = MUL_20       // PLL Multiplier (20x Multiplier)
#pragma config UPLLIDIV  = DIV_4        // USB PLL Input Divider (4x Divider)
#pragma config UPLLEN    = ON           // USB PLL Enable (Enabled)
#pragma config FPLLODIV  = DIV_1        // System PLL Output Clock Divider (PLL Divide by 1)

// DEVCFG1
#pragma config FNOSC     = PRIPLL       // Oscillator Selection Bits (Primary Osc w/PLL (XT+,HS+,EC+PLL))
#pragma config FSOSCEN   = ON           // Secondary Oscillator Enable (enabled)
#pragma config IESO      = OFF          // Internal/External Switch Over (disabled)
#pragma config POSCMOD   = XT           // Primary Oscillator Configuration (XT_HS osc mode)
#pragma config OSCIOFNC  = OFF          // CLKO Output Signal Active on the OSCO Pin (disabled)
#pragma config FPBDIV    = DIV_1        // Peripheral Clock Divisor (Pb_Clk is Sys_Clk/1)
#pragma config FCKSM     = CSDCMD       // Clock Switching and Monitor Selection (Clock Switch Disable, FSCM Disabled)
#pragma config WDTPS     = PS1048576    // Watchdog Timer Postscaler (1:1048576)
#pragma config FWDTEN    = OFF          // Watchdog Timer Enable (WDT disabled (SWDTEN Bit Controls))

// DEVCFG0
#pragma config DEBUG     = ON           // Background Debugger Enable (Debugger is enabled)
#pragma config ICESEL    = ICS_PGx2     // ICE/ICD Comm Channel Select (ICE EMUC2/EMUD2 pins shared with PGC2/PGD2)
#pragma config PWP       = OFF          // Program Flash Write Protect (disabled)
#pragma config BWP       = OFF          // Boot Flash Write Protect bit (Protection disabled)
#pragma config CP        = OFF          // Code Protect (Protection disabled)

#ifdef	__cplusplus
}
#endif

#endif	/* CONFIGBITS_H */