- on stock settings AP esp-lights without any passwd will be created, from here you can configure behaviour of lights
- stock credentials are admin:admin, building spiffs with
-D__CREDENTIALS__will auto-generate credentials and create img for QR sticker see:
- this QR could be used to easily setup lights via Android/IOS phones or esp-lights.apk could be used to setup/controll lights
- after power-up while blue led is still off pressing reset button will cause WIFI config reset
- short press of button changes light mode [color/all-rainbow/single-ranbow/all-custom/single/custom/off]
- long press of button adjust brightness of lights
| Wemos D1 | Led Strip | Mode button |
|---|---|---|
| D8 | - | X |
| 3V3 | - | X |
| D4 | DATA | - |
| G | GND | - |
| 5V | +V | - |
- WeMos-D1-Mini or WeMos-D1-Mini Lite or other solutions based on this processor
- WS2812 heatsink individually addressable rgb
- PSU
- Cable
- WeMos-Case: case-base.stl case-cap.stl button-mode.stl button-reset.stl
- Lantern: light-bottom.stl light-top.stl led-cover.stl led-insert.stl
- PSU used for build needs to be adjusted based on used led-strip length