Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

ERROR: Hostapd failed #78

Open
aleksejs-fomins opened this issue Jul 8, 2024 · 0 comments
Open

ERROR: Hostapd failed #78

aleksejs-fomins opened this issue Jul 8, 2024 · 0 comments

Comments

@aleksejs-fomins
Copy link

sudo ./lnxrouter --ap wlp1s0 MyAccessPoint -p MyPassPhrase --hostapd-debug 2

linux-router 0.7.6b (https://github.com/garywill/linux-router)
Released under LGPL, with no warranty. Use on your own risk.

PID: 22500
Target interface is wlp1s0 (14:ac:60:d8:2c:01) 
PCI: 0000:01:00.0
System-already-loaded driver: mt7921e
 Network controller [0280]: MEDIATEK Corp. Device [14c3:0616]

Use random LAN IPv4 address 192.168.200.1
wlp1s0 already working in channel 48 (5240 MHz)
Use wifi adapter current channel 48 as target channel
Creating a virtual WiFi interface... 
x0wlp1s0 created
Set x0wlp1s0 unmanaged by NetworkManager
Assigning MAC address 14:ac:60:d8:2c:0b to virtual interface x0wlp1s0 according to wlp1s0 ...

iptables v1.8.7 (nf_tables)
Notice: Not showing all operations done to iptables rules

haveged_watchdog PID: 22649

Starting hostapd
WARN: Low entropy detected. We recommend you to install `haveged'
hostapd PID: 22655
random: getrandom() support available
Configuration file: /dev/shm/lnxrouter_tmp/lnxrouter.wlp1s0.conf.8kWHhl/hostapd.conf
ctrl_interface_group=0
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-0f-ac:13
nl80211: Supported cipher 00-0f-ac:11
nl80211: Supported cipher 00-0f-ac:12
nl80211: Using driver-based off-channel TX
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: Enable multi-channel concurrent (driver advertised support)
nl80211: key_mgmt=0x1ff0f enc=0xfef auth=0x7 flags=0x24003d10d35bfbe0 rrm_flags=0x30 probe_resp_offloads=0x0 max_stations=0 max_remain_on_chan=5000 max_scan_ssids=4
nl80211: interface x0wlp1s0 in phy phy0
nl80211: Set mode ifindex 8 iftype 3 (AP)
nl80211: Failed to set interface 8 to mode 3: -16 (Device or resource busy)
nl80211: Try mode change after setting interface down
nl80211: Set mode ifindex 8 iftype 3 (AP)
nl80211: Mode change succeeded while interface is down
nl80211: Setup AP(x0wlp1s0) - device_ap_sme=0 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0x62d7af12f420
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x62d7af12f420 match= multicast=0
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x62d7af12f420 match= multicast=0
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x62d7af12f420 match= multicast=0
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x62d7af12f420 match= multicast=0
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x62d7af12f420 match= multicast=0
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x62d7af12f420 match= multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=04 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=0501 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=0503 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=0504 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=06 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=08 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=09 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=0a multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=11 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=12 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x62d7af12f420 match=7f multicast=0
rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0
nl80211: Add own interface ifindex 8 (ifidx_reason -1)
nl80211: if_indices[16]: 8(-1)
nl80211: Do not open EAPOL RX socket - using control port for RX
phy: phy0
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
nl80211: Regulatory information - country=CH (DFS-ETSI)
nl80211: 2400-2483 @ 40 MHz 20 mBm
nl80211: 5150-5250 @ 80 MHz 23 mBm (no outdoor)
nl80211: 5250-5350 @ 80 MHz 20 mBm (no outdoor) (DFS)
nl80211: 5470-5725 @ 160 MHz 26 mBm (DFS)
nl80211: 5725-5875 @ 80 MHz 13 mBm
nl80211: 57000-66000 @ 2160 MHz 40 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED][NO_IR]
nl80211: Mode IEEE 802.11a: 5180 5200 5220 5240 5260[RADAR] 5280[RADAR] 5300[RADAR] 5320[RADAR] 5500[RADAR] 5520[RADAR] 5540[RADAR] 5560[RADAR] 5580[RADAR] 5600[RADAR] 5620[RADAR] 5640[RADAR] 5660[RADAR] 5680[RADAR]
nl80211: Mode IEEE 802.11a: 5955[DISABLED] 5975[DISABLED] 5995[DISABLED] 6015[DISABLED] 6035[DISABLED] 6055[DISABLED] 6075[DISABLED] 6095[DISABLED] 6115[DISABLED] 6135[DISABLED] 6155[DISABLED] 6175[DISABLED] 6195[DISABLED]
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED][NO_IR]
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=36 freq=5180 MHz max_tx_power=23 dBm
Allowed channel: mode=2 chan=40 freq=5200 MHz max_tx_power=23 dBm
Allowed channel: mode=2 chan=44 freq=5220 MHz max_tx_power=23 dBm
Allowed channel: mode=2 chan=48 freq=5240 MHz max_tx_power=23 dBm
Allowed channel: mode=2 chan=149 freq=5745 MHz max_tx_power=13 dBm
Allowed channel: mode=2 chan=153 freq=5765 MHz max_tx_power=13 dBm
Allowed channel: mode=2 chan=157 freq=5785 MHz max_tx_power=13 dBm
Allowed channel: mode=2 chan=161 freq=5805 MHz max_tx_power=13 dBm
Allowed channel: mode=2 chan=165 freq=5825 MHz max_tx_power=13 dBm
Allowed channel: mode=2 chan=169 freq=5845 MHz max_tx_power=13 dBm
Allowed channel: mode=2 chan=173 freq=5865 MHz max_tx_power=13 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm
Could not determine operating frequency
x0wlp1s0: interface state UNINITIALIZED->DISABLED
x0wlp1s0: AP-DISABLED 
x0wlp1s0: Unable to setup interface.
hostapd_interface_deinit_free(0x62d7af129a50)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0x62d7af129a50)
x0wlp1s0: interface state DISABLED->DISABLED
hostapd_bss_deinit: deinit bss x0wlp1s0
x0wlp1s0: Deauthenticate all stations
nl80211: send_mlme - da=ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 no_encrypt=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme - Use bss->freq=0
nl80211: send_mlme -> send_frame_cmd
nl80211: CMD_FRAME freq=0 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 14 ac 60 d8 2c 0b 14 ac 60 d8 2c 0b 00 00 03 00
nl80211: Frame command failed: ret=-22 (Invalid argument) (freq=0 wait=0)
x0wlp1s0: AP-DISABLED 
hostapd_cleanup(hapd=0x62d7af12b1e0 (x0wlp1s0))
x0wlp1s0: CTRL-EVENT-TERMINATING 
hostapd_free_hapd_data: Interface x0wlp1s0 wasn't started
hostapd_interface_deinit_free: driver=0x62d7ae51f980 drv_priv=0x62d7af12f8c0 -> hapd_deinit
nl80211: deinit ifname=x0wlp1s0 disabled_11b_rates=0
nl80211: Remove monitor interface: refcount=0
nl80211: Remove beacon (ifindex=8)
netlink: Operstate: ifindex=8 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
nl80211: Set mode ifindex 8 iftype 2 (STATION)
nl80211: Failed to set interface 8 to mode 2: -16 (Device or resource busy)
nl80211: Try mode change after setting interface down
nl80211: Set mode ifindex 8 iftype 2 (STATION)
nl80211: Mode change succeeded while interface is down
nl80211: Teardown AP(x0wlp1s0) - device_ap_sme=0 use_monitor=0
nl80211: Unsubscribe mgmt frames handle 0x8888ea5f279a7ca9 (AP teardown)
hostapd_interface_free(0x62d7af129a50)
hostapd_interface_free: free hapd 0x62d7af12b1e0
hostapd_cleanup_iface(0x62d7af129a50)
hostapd_cleanup_iface_partial(0x62d7af129a50)
hostapd_cleanup_iface: free iface=0x62d7af129a50

iptables: NAT 
MASQUERADE  all opt -- in * out !x0wlp1s0  192.168.200.0/24 !-> 192.168.200.0/24   /* lrt22500x0wlp1s0 */
ACCEPT  all opt -- in x0wlp1s0 out *  192.168.200.0/24  -> 0.0.0.0/0   /* lrt22500x0wlp1s0 */
ACCEPT  all opt -- in * out x0wlp1s0  0.0.0.0/0  -> 192.168.200.0/24   /* lrt22500x0wlp1s0 */
Loaded kernel module nf_nat_pptp

iptables: allow DNS
ACCEPT  tcp opt -- in x0wlp1s0 out *  192.168.200.0/24  -> 192.168.200.1   tcp dpt:53 /* lrt22500x0wlp1s0 */
ACCEPT  udp opt -- in x0wlp1s0 out *  192.168.200.0/24  -> 192.168.200.1   udp dpt:53 /* lrt22500x0wlp1s0 */

iptables: allow dhcp
ACCEPT  udp opt -- in x0wlp1s0 out *  0.0.0.0/0  -> 0.0.0.0/0   udp dpt:67 /* lrt22500x0wlp1s0 */

Starting dnsmasq
Jul  8 17:44:51 dnsmasq[22676]: started, version 2.90 cachesize 150
Jul  8 17:44:51 dnsmasq[22676]: compile time options: IPv6 GNU-getopt DBus no-UBus i18n IDN2 DHCP DHCPv6 no-Lua TFTP conntrack ipset no-nftset auth cryptohash DNSSEC loop-detect inotify dumpfile
Jul  8 17:44:51 dnsmasq-dhcp[22676]: DHCP, IP range 192.168.200.10 -- 192.168.200.250, lease time 1h
Jul  8 17:44:51 dnsmasq-dhcp[22676]: DHCP, sockets bound exclusively to interface x0wlp1s0
Jul  8 17:44:51 dnsmasq[22676]: reading /etc/resolv.conf
Jul  8 17:44:51 dnsmasq[22676]: using nameserver 127.0.0.53#53
Jul  8 17:44:51 dnsmasq[22676]: cleared cache
dnsmasq PID: 22676


== Setting up completed, now linux-router should be working ==
Error occured

ERROR: hostapd failed. (tip: try '--hostapd-debug' to get some debug info)

Error occured


Doing cleanup.. 
Jul  8 17:44:58 dnsmasq[22676]: exiting on receipt of SIGTERM
Killed dnsmasq.pid 22676 dnsmasq
Terminated
Killed haveged_watchdog.pid 22649 lnxrouter
Killed keep_running.pid 22699 bash
Undoing iptables changes ..
Exiting: This is the only running instance
Cleaning up done

Suggestions?
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@aleksejs-fomins