Pylontech switch off / wake up per Remote control

[Manos1966]

Somebody asked me whether I had experience remote turning ON/OFF the Pylontech battery.
I do not (and I can not find the original post.... until spcqike finds it 😉 )

However, I found by coincidence the explanations of how it is done: Using the CONSOLE port of the battery.

connect Pin4 (+5~+12V) with Pin5 (GND) for wake up
Wake up signal must be ≥0.5Sec, current must be between 5~15mA.

Here is a good example of somebody using the console port to do the firmware update
Pylontech US2000C auslesen und Firmware Update via RS232

Even nicer, here is somebody explaining (in German) how he remote controls the powering up of the battery:
Solar – Pylontech Akku (C-Serie) über Konsole aufwecken

Just in case it is of use for somebody.

[madmartin]

I mentioned firmware update also on the Pylontech-battery wiki page (with download source)

[Manos1966]

Danke fuer die Info Martin, daraufhin habe ich das Video in den von dir erstellten Bereich platziert.