RaspberryMatic on Docker with HmIP-RFUSB in Homeassistant does not recognize devices

[petervflocke]

Hi and Hallo,

I tried to install RaspberryMatic on my Home Assistant (HA) instance. Installation was fine, the addon provides Web-GUI within HA.
Unfortunately I cannot teach-in my test device - HmIP eTRV-2, it does not appear in Device-Inbox.

The HmIP-RFUSB is a "magenta" version of the USB-Stick and there is an error (?) message in the log:
Updating Homematic RF-Hardware: HMIP-RFUSB: 4.2.14=>2.8.6, ERROR ( != 2.8.6). This has been already discussed here.

However the same usb-stick works just fine on an oracle VB (ova) version and on RPI3 there I can teach-in the same test device without any issue.

This is the dmesg part:

[ 2.270426] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd
[ 2.375523] usb 1-1.3: New USB device found, idVendor=1b1f, idProduct=c020, bcdDevice= 1.00
[ 2.375547] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.375558] usb 1-1.3: Product: eQ-3 HmIP-RFUSB
[ 2.458897] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd
[ 2.567460] usb 1-1.4: New USB device found, idVendor=0451, idProduct=16a8, bcdDevice= 0.09
[ 2.567499] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.089071] usb 1-1.3: cp210x converter now attached to ttyUSB0

The addon log:

Mounting /data as /usr/local (Home Assistant Add-On): OK
Starting watchdog...
Identifying onboard hardware: oci, OK
Initializing RTC Clock: no hardware found
Running sysctl: OK
Checking for Factory Reset: not required
Checking for Backup Restore: not required
Initializing System: OK
Starting logging: OK
Init onboard LEDs: init, OK
Starting irqbalance: OK
Starting network: eth0: link up, fixed, firewall, inet up, 172.30.33.5, OK
Identifying Homematic RF-Hardware: ....HmRF: none, HmIP: HMIP-RFUSB/USB, OK
Updating Homematic RF-Hardware: HMIP-RFUSB: 4.2.14=>2.8.6, ERROR ( != 2.8.6)
Starting hs485dLoader: disabled
Starting xinetd: OK
Starting eq3configd: OK
Starting lighttpd: OK
Starting ser2net: disabled
Starting ssdpd: OK
Starting ha-proxy: OK
Starting NUT services: disabled
Initializing Third-Party Addons: OK
Starting LGWFirmwareUpdate: ...OK
Setting LAN Gateway keys: OK
Starting hs485d: disabled
Starting multimacd: not required
Starting rfd: no BidCos-RF hardware found
Starting HMIPServer: ...................OK
Starting ReGaHss: .OK
Starting CloudMatic: OK
Starting NeoServer: OK
Starting Third-Party Addons: OK
Starting crond: OK
Setup onboard LEDs: booted, OK

My HA runs on Home Assistant OS 7.0 / Core: 2021.12.0 and RPI4
By the way the same problem with not working teach-in function I had with the "native" addon for HomeMatic from HA.

Do you have any idea what I'm doing wrong in compare to VirtualBox and/or a direct RPI3 version?
Any kind of your assistance is very much appreciated!

Regards and viele Grüße
Peter

[petervflocke]

Update:

My HA runs on Home Assistant OS 7.0 / Core: 2021.12.0 and RPI4

Move the USB-Stick far awy from the RPI4 (using usb-extention cable), where the radio interferences comming from USB port disturb the signal recepients. See the solution here: https://homematic-forum.de/forum/viewtopic.php?f=65&t=71362&sid=3bb92ba8a31331fe8beca3c36abc7e51&start=10#p694870