From a2c1fdc018ee1967c7a3c14ce6be959db98c1956 Mon Sep 17 00:00:00 2001 From: Lennart Pegel Date: Mon, 4 Jul 2022 18:16:49 +0200 Subject: [PATCH] Update README.md --- doc/Behringer X-Touch Mini/README.md | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/doc/Behringer X-Touch Mini/README.md b/doc/Behringer X-Touch Mini/README.md index fd2aee3..3b88133 100644 --- a/doc/Behringer X-Touch Mini/README.md +++ b/doc/Behringer X-Touch Mini/README.md @@ -6,6 +6,7 @@ controlled by the rotary encoders. Bidirectional with LED ring feedback. ## Installation [![][setupImage]][setupImage] + Make sure the script is properly selected & activated in Bitwig's controller settings. If set up correctly, it should look like in the picture above. @@ -20,7 +21,7 @@ _(click to see fullsize)_ * Auto-disable punch-in/out whenever transport stops * Overdub * Write Automation -* The `BUTTON MODE` button (lower 2nd button) can either be held or pressed short to permanently toggle. +* The `BUTTON MODE` button (lower 2nd button) can either be held (to enable it temporarily) or pressed once (to enable it permanently). While held or enabled (lit), the 6 lower right buttons will determine what the upper 8 buttons are controlling (see labels in `[brackets]`): @@ -34,7 +35,7 @@ With this mode enabled, the upper buttons determine the type of value that the 8 - Initially, you're controlling "Send 1 - 8" of the selected channel. The **`-`** and **`+`** buttons switch one send up/down, e.g. "Sends 2 - 9" after pressing **`+`** first time. - You can **lock MultiSend to the selected channel** ("pinning" in Bitwig speak) by **double-clicking** a - **`MultiSend`** button, so you keep control over that channel's sends even when selecting a different channel. + **`MultiSend`** button, so you keep control over that channel's sends even when selecting a different channel in the GUI. - A blinking **`MultiSend`** button indicates it is locked. * **DEV-Param** (alias **Remote Controls** of the currently selected device; 2x lockable) - You can **lock (pin) to the device** by **double-clicking** this button, so you stay in control over that particular device even after navigating to a different device or channel.