diff --git a/docs/foldkb-build-guide.md b/docs/foldkb-build-guide.md index 53ee933..510bc5b 100644 --- a/docs/foldkb-build-guide.md +++ b/docs/foldkb-build-guide.md @@ -19,3 +19,7 @@ For the Rev. 1.0 PCB, a trace is missing on the left 1.5u thumb key for the left To fix this, after solder all of the switches, add a jumper wire between these two pins as shown below: ![](./assets/images/foldkb/jumper-1.5u.jpg) + +## Default Keymap + +Here's the default keymap if you need it: [FoldKB Default Keymap](../static/layouts/keymap_FoldKB_rev1.pdf) diff --git a/docs/iris-aluminum-case-build-guide.md b/docs/iris-aluminum-case-build-guide.md index 322568f..c556acd 100644 --- a/docs/iris-aluminum-case-build-guide.md +++ b/docs/iris-aluminum-case-build-guide.md @@ -178,6 +178,10 @@ Put the bottom part of the case on and then screw it to the top half. Add your keycaps and knob (if you have a rotary encoder)! +## Default Keymap + +Here's the default keymap if you need it: [Iris Default Keymap](../static/layouts/Iris%20Default%20Keymap.pdf) + ## Remapping/reprogramming Board Looking to remap/reprogram your board? Check out our guide for [remapping your keyboard](remapping-keyboard). diff --git a/docs/iris-ce-build-guide.md b/docs/iris-ce-build-guide.md index 1a66624..670bde7 100644 --- a/docs/iris-ce-build-guide.md +++ b/docs/iris-ce-build-guide.md @@ -103,6 +103,10 @@ Add keycaps to all of the switches. Repeat the same process for the other half of the keyboard. +## Default Keymap + +Here's the default keymap if you need it: [Iris Default Keymap](../static/layouts/Iris%20Default%20Keymap.pdf) + ## Remapping/reprogramming Board Looking to remap/reprogram your board? Check out our guide for [remapping your keyboard](remapping-keyboard). diff --git a/docs/iris-rev3-build-guide.md b/docs/iris-rev3-build-guide.md index 101570b..5a74ecc 100644 --- a/docs/iris-rev3-build-guide.md +++ b/docs/iris-rev3-build-guide.md @@ -151,6 +151,10 @@ If you have an acrylic middle layer with tenting holes, here's a video on how to If you have a 3D-printed middle layer, see this page on installing it: [Iris 3D-printed Middle Layer Installation](iris-middle-layer) +## Default Keymap + +Here's the default keymap if you need it: [Iris Default Keymap](../static/layouts/Iris%20Default%20Keymap.pdf) + ## Re-Program Board Note Oh, looking to re-program your board? Never fear! Come look [here](flashing-firmware). diff --git a/docs/iris-rev6-build-guide.md b/docs/iris-rev6-build-guide.md index 0e267e5..593a348 100644 --- a/docs/iris-rev6-build-guide.md +++ b/docs/iris-rev6-build-guide.md @@ -276,6 +276,10 @@ Done! ![](./assets/images/iris-rev6/IMG_7878.jpg) +## Default Keymap + +Here's the default keymap if you need it: [Iris Default Keymap](../static/layouts/Iris%20Default%20Keymap.pdf) + ## Remapping/reprogramming Board Looking to remap/reprogram your board? Check out our guide for [remapping your keyboard](remapping-keyboard). diff --git a/docs/iris-se-build-guide.md b/docs/iris-se-build-guide.md index ac1606e..ca90c18 100644 --- a/docs/iris-se-build-guide.md +++ b/docs/iris-se-build-guide.md @@ -174,6 +174,10 @@ Repeat the same process for the other half of the keyboard. ![](./assets/images/iris-se/IMG_1885.jpg) +## Default Keymap + +Here's the default keymap if you need it: [Iris Default Keymap](../static/layouts/Iris%20Default%20Keymap.pdf) + ## Remapping/reprogramming Board Looking to remap/reprogram your board? Check out our guide for [remapping your keyboard](remapping-keyboard). diff --git a/docs/quefrency-hotswap-build-guide.md b/docs/quefrency-hotswap-build-guide.md index b0d4042..f20d7ff 100644 --- a/docs/quefrency-hotswap-build-guide.md +++ b/docs/quefrency-hotswap-build-guide.md @@ -192,6 +192,10 @@ All done now, repeat for the other half of the board! ![](./assets/images/quefrency-rev4/IMG_5577.jpeg) +## Default Keymap + +Here's the default keymap if you need it: [Quefrency Default Keymap](../static/layouts/keymap_Quefrency_rev3.pdf) + ## Re-Programming Board Note Oh, looking to re-program your board? Never fear! Come look [here](flashing-firmware). diff --git a/docs/sinc-rev3-build-guide.md b/docs/sinc-rev3-build-guide.md index a37421d..39bfb01 100644 --- a/docs/sinc-rev3-build-guide.md +++ b/docs/sinc-rev3-build-guide.md @@ -74,6 +74,10 @@ Next, click on `Keymap` on the left side bar, and then click on the ISO Enter ke ![](./assets/images/sinc-rev3/via-keymap.jpg) +## Default Keymap + +Here's the default keymap if you need it: [Sinc Default Keymap](../static/layouts/keymap_Sinc_rev2.pdf) + ## Reflashing Board If you'd like to reflash your Sinc, since it has a RP2040 controller on board, follow these instructions: [Flashing RP2040 Board](flashing-firmware#rp2040-board-uf2-bootloader) \ No newline at end of file diff --git a/docs/wtf60-build-guide.md b/docs/wtf60-build-guide.md index 766e20a..069ae03 100644 --- a/docs/wtf60-build-guide.md +++ b/docs/wtf60-build-guide.md @@ -81,9 +81,13 @@ Insert screws through the plate to secure the PCB to the standoffs on the case. ![](./assets/images/wtf60/IMG_3191.jpeg) +## Default Keymap + +Here's the default keymap if you need it: [WTF60 Default Keymap](../static/layouts/keymap_WTF60_rev1.pdf) + ## Re-Programming Board Note -Oh, looking to re-program your board? Never fear! Come look [here](flashing-firmware). +Oh, looking to re-program your board? Never fear! Come look [here](flashing-firmware). ## Rejoice!