From 3832204b5b1a8694b24049114484ddd7150d00f9 Mon Sep 17 00:00:00 2001 From: Ian Gillespie Date: Mon, 9 Dec 2024 21:20:23 -0800 Subject: [PATCH] Changed 8mm screw to 6mm as 8mm is too long for this case. --- mechanical/rocker_bogie/README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mechanical/rocker_bogie/README.md b/mechanical/rocker_bogie/README.md index daf8bfa6..975274bf 100644 --- a/mechanical/rocker_bogie/README.md +++ b/mechanical/rocker_bogie/README.md @@ -74,7 +74,7 @@ Attach the 1-channel U bracket to the long extruded shaft `11118-0024-0288` usin ### Attach the front and back of the rocker-bogie -Use 4 hurricane nuts and the 45 degree bracket to connect the back and the front of the rocker-bogie using M4 socket screws of length 8mm as in the image below. +Use 4 hurricane nuts and the 45-degree bracket to connect the front and back of the rocker-bogie with 6mm M4 socket screws, as shown in the image below. Avoid screws longer than 6mm, as they will hit the goRail before fully tightening. ![bottom view](images/connect45bracket.png)