Repositories list

• dm-nafe13388-application-examples

  Public
  This is a demo application which provides a command line interface for these 6 applications of NAFE13388 for Analog to Digital Conversion.<br>Current Sensing using SCSR Conversion Voltage Sensing using SCSR Conversion Voltage Sensing using MCMR Conversion RTD 2/4 Wires using SCCR Conversion Weight Scale

  C

  •

  BSD 3-Clause "New" or "Revised" License

  •0•0•0•0•Updated Jan 17, 2025Jan 17, 2025

• dm-motor-control-demo-for-i-mx93

  Public
  Implementation of motor control algorithms using the MCIMX93-EVK development kit. It includes hardware configuration details, setup instructions, and an overview of the software implementation process.

  C

  •

  Other

  •0•0•0•0•Updated Jan 16, 2025Jan 16, 2025

• dm-snoring-detection-based-on-rt1060

  Public
  The snoring detection demo is based on the i.MX RT1060. WAV audio files can be played via the speaker and processed in a ML model to determine if there's snoring. The results are shown on a GUI designed with LVGL.

  C

  •

  Other

  •0•0•0•0•Updated Jan 16, 2025Jan 16, 2025

• dm-tss-powered-on-device-learning-fan-anomaly-based-on-mcxa156

  Public
  Time Series Studio powered, on-device learning Fan anomaly detection based on FRDM-MCXA156

  C

  •

  Other

  •0•0•0•0•Updated Jan 16, 2025Jan 16, 2025

• dm-mcxn-bubble-level-demo

  Public
  This demo shows how to integrate the NXP sensors FXLS8971CF (3-axis accelerometer) with FRDM-MCXN947 platform. In this application the FXLS8971CF is hosted and an I2C peripheral on an “Inclinometer 4 Click” board from Mikroe.

  C

  •

  Other

  •0•0•0•0•Updated Jan 15, 2025Jan 15, 2025

• an-mcxn236-usb-bridge-to-i3c

  Public
  This is the complementary project for [AN14434](https://www.nxp.com.cn/docs/en/application-note/AN14434.pdf), which demonstrates how implement usb to i3c demo on MCXN236.In the MCXN236 USB to I3C demo, the USB device uses USB CDC virtual com class to communicate with PC host. You can use terminal tool to send a serial data to control I3C interface.

  0•0•0•0•Updated Jan 15, 2025Jan 15, 2025

• dm-mikroe-knob-g-click-frdm

  Public
  Demo is an example for MIKROE Knob G Click module in FRDM boards with CMSIS driver and NXP HAL Software.

  0•0•0•0•Updated Jan 15, 2025Jan 15, 2025

• dm-mcxc444-lcd-and-fxls8974cf-motion-detection

  Public
  This example use FRDM-MCXC444 and on-board FXLS8974CF accelerometer to demonstrate autonomous motion detection of motion and direction, also this demo shows the board direction on the on board LCD display.

  C

  •

  Other

  •0•0•0•0•Updated Jan 14, 2025Jan 14, 2025

• an-kw4x-bluetooth-le-nfc-integration

  Public
  This software accompanies application note [AN13953], which gives instructions on how to create a Bluetooth Low Energy project for the EVK-KW45 development board and MCUXpresso IDE, and how to integrate NFC Reader Library.

  C

  •

  Other

  •0•0•0•0•Updated Jan 13, 2025Jan 13, 2025

• dm-wifi-lcd-connect-frdm-mcxn947

  Public
  This is a demo example of Wi-Fi connect using LCD interface on FRDM-MCXN947 using Wi-Fi module AW-AM510.

  C

  •

  Other

  •0•0•0•0•Updated Jan 13, 2025Jan 13, 2025

• dm-tamper-detection-using-low-power-wakeup-sensor-over-ble

  Public
  This example demo describes how to configure low-power motion or magnetic wake-up sensor for tamper/theft detection and transmit ALERT to connected end user via BLE wireless UART using FRDM-MCXW71.Such use-case can find many applications where user would like to completely shut off power supply or put the device in power down mode etc.

  C

  •

  Other

  •0•1•0•0•Updated Jan 13, 2025Jan 13, 2025

• dm-fashion-mnist-recognition-on-mcxn947

  Public
  Toy doll recognition base on machine learning algorithm, power by MCXN-947.

  C

  •

  Other

  •0•0•0•0•Updated Jan 6, 2025Jan 6, 2025

• dm-label-cifar10-images-on-mcxn947

  Public
  Label the CIFAR10 images from the camera on FRDM-MCXN947

  C

  •

  Other

  •1•0•0•0•Updated Jan 6, 2025Jan 6, 2025

• dm-multiple-face-detection-on-mcxn947

  Public
  This demo demonstrates the AI capabilities of the mcxn947. It displays the image captured by the camera on the LCD screen and performs face detection.

  C

  •

  Other

  •2•7•1•0•Updated Jan 6, 2025Jan 6, 2025

• dm-multiple-person-detection-on-mcxn947

  Public
  C

  •

  Other

  •1•1•0•0•Updated Jan 6, 2025Jan 6, 2025

• an-mcxn947-mdio-slave-interface-by-smartdma

  Public
  This software accompanies the application note primarily introduces how to implement MDIOI slave interface functionality using SmartDMA

  C

  •

  Other

  •0•0•0•0•Updated Jan 2, 2025Jan 2, 2025

• dm-pca9420uk-evm-pmic-for-low-power-application

  Public
  The PCA9420 is a highly integrated Power Management IC (PMIC), targeted to provide a full power management solution for low-power microcontroller applications or other similar applications. The device consists of a linear battery charger capable of charging up to 315 mA current.

  C

  •

  BSD 3-Clause "New" or "Revised" License

  •0•0•0•0•Updated Dec 23, 2024Dec 23, 2024

• an-mc-bldc-ke17z

  Public
  This application note demonstrates how to implement the six-step commutation control of brushless direct current(BLDC) motor on KE17Z512 and KE17Z256 MCUs. The NXP Freedom board FRDM-MC-LVBLDC is used as a hardware platform for the motor control reference solution. The hardware-dependent part of the motor control software is addressed as well.

  C

  •

  Other

  •0•0•0•0•Updated Dec 18, 2024Dec 18, 2024

• an-emulating-i2s-bus-with-flexio-on-mcxa156

  Public
  This application note describes how to emulate I2S interface with FlexIO on MCXA156 and implement a USB speaker device on MCXA156. The audio function is tested using the codec on LPCXpress55s69 board.

  C

  •

  Other

  •0•0•0•0•Updated Dec 16, 2024Dec 16, 2024

• dm-lpc5536-evse-sigbrd

  Public
  The EVSE-SIG-BRD is an add-on development board that supports electric vehicle supply equipment (EVSE) platform development. The board also supports the proximity pilot, ground fault circuit interrupter (GFCI), and relay drive features. The main host of the system is on a separate processor development board

  C

  •

  Other

  •0•0•0•0•Updated Dec 13, 2024Dec 13, 2024

• an-flash-memory-swap-feature-on-ke17z512

  Public
  The flash swap function, which is accessible on certain Kinetis microcontroller components, serves as a strong tool for dependable software enhancements. This document discusses how to employ the swap feature effectively. Frequently asked queries are responded to, and a practical use case is illustrated.

  C

  •

  Other

  •0•0•0•0•Updated Dec 13, 2024Dec 13, 2024

• dm-smart-sensing-inhaler

  Public
  This example use FRDM-MCXW71 and on-board FXLS8974CF accelerometer as Tilt sensor withMPL3115 absolute pressure sensor expansion board FRDM-STBC-P3115 to demonstrate connected smart sensing inhaler application.

  C

  •

  Other

  •0•0•0•0•Updated Dec 11, 2024Dec 11, 2024

• dm-mcxn-portable-anomaly-detect-demo

  Public
  The Portable Anomaly Detect demo shows an on-device trainable anomaly detection platform that is based on the FRDM-MCXN947 board. The demo shows how to train the SVM model on-device with FXLS8974CF accelerometer data and inference SVM model on-device too.During the whole life cycle of a device, learning may need to be done multiple times.

  C

  •

  Other

  •0•0•0•0•Updated Dec 11, 2024Dec 11, 2024

• dm-slcd-and-fxls8974-on-mcxc444

  Public
  This demo uses the on board FXL8974 3-axis Low G accelerometer to obtain real time acceleration data, the on board RGB LED to indicate the orientation, and the SLCD interface to print out the y acceleration data.

  C

  •

  Other

  •0•0•0•0•Updated Dec 10, 2024Dec 10, 2024

• dm-rw612frdm-door-chime-demo

  Public
  This demo shows how to implement a wireless door chime with the RW612-FRDM board. The chime is controlled over Wi-Fi with the MQTT application protocol. Chime sound data is streamed on the I2S pins of the RW612-FRDM Arduino header. An external codec and also an amplifier are required to play the sound on an external speaker.

  C

  •

  Other

  •0•1•0•0•Updated Dec 10, 2024Dec 10, 2024

• ap-frdm-mcx-buspal

  Public
  This software pack provides the buspal application ported to different MCX device families. Buspal is an embedded software tool that is available as a companion to blhost. The tool acts as a bus translator with an established connection with blhost over UART and with the target device over I2C, SPI or CAN

  0•0•0•0•Updated Dec 10, 2024Dec 10, 2024

• dm-matter-zigbee-bridge-rw612

  Public
  This demo provide user how to integrate non-matter device as zigbee nodes to Matter enviroment

  C++

  •

  Apache License 2.0

  •0•1•0•0•Updated Nov 28, 2024Nov 28, 2024

• rd-motion-control-slave-servo-mimxrt1180

  Public
  This application demonstrates how to implement EtherCAT+ PMSM motor control on the iMX.RT1180.

  C

  •

  Other

  •0•0•0•0•Updated Nov 26, 2024Nov 26, 2024

• an-mcxc444-power-mode-switch

  Public
  TBD

  C

  •

  BSD 3-Clause "New" or "Revised" License

  •0•0•0•0•Updated Nov 25, 2024Nov 25, 2024

• rd-mcu-svui

  Public
  This NXP EdgeReady solution leverages the i.MX RT106V MCU, with integrated Voice Intelligent Technology (VIT) Speech to Intent (S2I) offering a natural Voice UI for touchless applications. Latest software update enables Wi-Fi and Matter connectivity

  C

  •

  Other

  •1•0•0•0•Updated Nov 20, 2024Nov 20, 2024