Is it possible to show LSB, MSB and name of a chosen Performance when using DAW?

[DutchBigEd]

I'm working on a "box" which will contain 3 MiniDexed DX7's and a USB to MIDI controller (Teensy 4), for each MiniDexed an Oled screen.
The MiniDexed I've made so far can show the LSB, MSB and name of the performance, but I have to navigate by means of the rotary encoder.
Via my DAW (Ableton) I can change the Performance by setting SUB to 1 and use PGM to choose from the wanted Performances, and I can hear that the right Performance is playing.
My question is: Is it possible to show the LSB, MSB and Performance on the Oled display, just like with the rotary encoder?
Now when I start the MiniDexed it just shows MiniDexed TG1 -> thats all, and no matter what I send with my DAW, the display stays the same.
Am I doing something wrong or is this not implemented?

[Banana71]

Hi Ed, you're not doing anything wrong. That's a function I really want too. I would also like to have the option to change the bank by pressing and turning the encoder in the Performance Load menu.

[Banana71]

For all those lucky enough to have multiple miniDexeds, the following would be helpful:
#581 (comment)

[DutchBigEd]

Thanks, I use a Teensy 4 to control 3 MiniDexed via USB, this is possible because the Teensy 4 has multiple UART's and I assign an UART for each MiniDexed so I can use the same micro SD card(same Performances, same minidexed.ini, performance.ini, cmdline.txt and config.txt) for each MiniDexed.

[Banana71]

#581 (comment)

it's just an idea that hasn't been implemented yet