Replies: 30 comments
-
Hi. Can you share your card config? Does this happen only when you add a new card or with existing cards as well? |
Beta Was this translation helpful? Give feedback.
-
Its the default card. Nothing changed... type: custom:sunsynk-power-flow-card |
Beta Was this translation helpful? Give feedback.
-
It works no issues in yaml editing, but i guess the reason why you wanted to introduce the visual editor was for ease of use. |
Beta Was this translation helpful? Give feedback.
-
What browser are you using? |
Beta Was this translation helpful? Give feedback.
-
I have tried, |
Beta Was this translation helpful? Give feedback.
-
Does it work for you in incognito mode? |
Beta Was this translation helpful? Give feedback.
-
Same error. Tried removing either one. restarting, no luck. |
Beta Was this translation helpful? Give feedback.
-
You should only have one instance (location). Did you ever manually install the card? Can you try delete all instances of the card and install via HACS |
Beta Was this translation helpful? Give feedback.
-
BTW . Just had a friend installed it on his who has never used this integration. and he gets the same s.entries.... issue. |
Beta Was this translation helpful? Give feedback.
-
Are both of you using MacBook's? |
Beta Was this translation helpful? Give feedback.
-
No the HA is on Intel nuc. Haos.Best RegardsRiaan GroblerOn 13 Dec 2023, at 17:48, slipx06 ***@***.***> wrote:
Are both of you using MacBook's?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
I have been completely unable to reproduce this my side. Do you perhaps have more logs that could assist in the debug process? Either in the System -> Logs, as well as in developers tools (F12 for chromium based browsers) |
Beta Was this translation helpful? Give feedback.
-
I have tested this with a windows PC on Chrome. Just a side note. The other HA instance i am managing is on a Pi4 4GB with the same results. also a bit baffled if no one else is getting it.. |
Beta Was this translation helpful? Give feedback.
-
Can you share some Chrome console logs. |
Beta Was this translation helpful? Give feedback.
-
@HybridRCG can you test with the latest release if this is still a problem |
Beta Was this translation helpful? Give feedback.
-
Just wanted to add that I have the exact same issue. I am on Linux using Firefox 121. I just updated to the latest version of the card and cleared the cache (I think). Problem is still here. Here is some logs when I try to add the card
|
Beta Was this translation helpful? Give feedback.
-
Hi. The problem is still there. Cleared the cache. New browser. Tried Chrome safari brave Firefox. No luck. 😩 |
Beta Was this translation helpful? Give feedback.
-
@ppmt those errors seem to be related to card mod. Can you share the error that is printed at the bottom of the card editor |
Beta Was this translation helpful? Give feedback.
-
it is the same as @HybridRCG |
Beta Was this translation helpful? Give feedback.
-
Can you try with a really simple card config
|
Beta Was this translation helpful? Give feedback.
-
I get the same error straight away :( |
Beta Was this translation helpful? Give feedback.
-
It could be related to this Can you remove card mod and see if the problem goes away |
Beta Was this translation helpful? Give feedback.
-
Yes that did it. I removed card-mod and straight away I can access the UI... Now just have to remember why I installed card-mod to start with... |
Beta Was this translation helpful? Give feedback.
-
Great. @HybridRCG can you confirm the workaround. |
Beta Was this translation helpful? Give feedback.
-
Hi
I have uninstalled card-mod , cleared cache, tried re-installing the sunsynk card. but still have the same issue. :(
Kind Regards
Riaan Grobler
…On 22 Dec 2023, at 10:09, slipx06 ***@***.***> wrote:
Great. @HybridRCG <https://github.com/HybridRCG> can you confirm the workaround.
I see there is an open issue to track this thomasloven/lovelace-card-mod#321 <thomasloven/lovelace-card-mod#321>
—
Reply to this email directly, view it on GitHub <#174 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ADUQOXFGCK6TYBYMJWLFPKDYKU53BAVCNFSM6AAAAABARKLAVOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNRXGM3DQNZVHE>.
You are receiving this because you were mentioned.
|
Beta Was this translation helpful? Give feedback.
-
Ok. You'll need to share some browser console logs in order to understand what is going on. |
Beta Was this translation helpful? Give feedback.
-
Hi..
Found the culprit!!
I had browser-mode installed.
Removed it and started working…
Thanks for the help.
Kind Regards
Riaan Grobler
… On 22 Dec 2023, at 10:25, slipx06 ***@***.***> wrote:
Ok. You'll need to share some browser console logs in order to understand what is going on.
—
Reply to this email directly, view it on GitHub <#174 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ADUQOXFKSHK5LZI2WG2MUCLYKU7WJAVCNFSM6AAAAABARKLAVOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNRXGM4DEOBZGE>.
You are receiving this because you were mentioned.
|
Beta Was this translation helpful? Give feedback.
-
Adding back card-mod brings back the problem.
so removed card-mod , browser-mod for the card to work,
Kind Regards
Riaan
… On 22 Dec 2023, at 10:25, slipx06 ***@***.***> wrote:
Ok. You'll need to share some browser console logs in order to understand what is going on.
—
Reply to this email directly, view it on GitHub <#174 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ADUQOXFKSHK5LZI2WG2MUCLYKU7WJAVCNFSM6AAAAABARKLAVOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNRXGM4DEOBZGE>.
You are receiving this because you were mentioned.
|
Beta Was this translation helpful? Give feedback.
-
Glad we figured this out. You'll need to keep an eye on on those two addon's for updates to hopefully fix this. FYI @thomasloven |
Beta Was this translation helpful? Give feedback.
-
Could someone please verify that this is a problem with card-mod 3.3.0? |
Beta Was this translation helpful? Give feedback.
-
Is there an existing issue for this?
Current Behavior
Visual editor is not supported for this configuration:
s.entries is not a function. (In 's.entries()', 's.entries' is undefined)
You can still edit your config in YAML.
Steps To Reproduce
Add new Card on dashboard
No changes
Cant edit in visual editor because of error
Expected behaviour
Able to edit the config settings in the visual editor.
Card Version
4.4.3
Home Assistant Version
Core : 2023.12.1
Configuration
No response
Relevant log output
No response
Beta Was this translation helpful? Give feedback.
All reactions