X the Solar PV1 or PV2 current or voltage in entities will break the card

[deberha2]

I am using this card with my Sol-Ark12K. The card is great! I linked PV1 and PV2 to the watts output from each of my two AC-coupled Enphase arrays. I do not have any solar panels connected directly to the Sol-Ark. That was working. Then I wanted to try to remove the current and voltage display from PV1 and PV2 on the card since I don't really need those. When I "x" all 4 of those and tried to save them as blank, I broke the card. I opened a new card and can find the values that need to be put back on those solar entities (IE "sensor.sunsynk_pv1_voltage", but I don't know where or how to do that. I'm not a programmer but I can usually figure things out... The entities in question are: pv1_voltage_109 , pv1_current_110 , pv2_voltage_111 , pv2_current_112.
The error that is shown is "! Please include the day_pv_energy_108 attribute and entity ID" and the card is no longer displayed.

[slipx06]

Hi. Its looking for the entity day_pv_energy_108: sensor.sunsynk_day_pv_energy. You should add it back to your config. You can set it to none if you don't have a sensor for this.

entities:
  day_pv_energy_108: none

You can delete all of these from your config to hide them

 pv1_voltage_109: sensor.sunsynk_pv1_voltage
 pv1_current_110: sensor.sunsynk_pv1_current
 pv2_voltage_111: sensor.sunsynk_pv2_voltage
 pv2_current_112: sensor.sunsynk_pv2_current