I do not consume electricity from the network, but it shows that there is consumption

[amgstone]

Is there an existing issue for this?

• I have searched the existing issues

Current Behavior

I do not consume electricity from the network, but it shows that there is consumption

Steps To Reproduce

No response

Expected behaviour

I do not consume electricity from the network, but it shows that there is consumption

Card Version

new

Home Assistant Version

new

Configuration

No response

Relevant log output

No response

[slipx06]

Hi.
According to your sensor readings you are consuming more power than you are producing.
721W of Solar power, but consuming 755W (414W +341W) from battery and load. Are your sensors accurate? Are you providing your own sensor for essential_power?

[amgstone]

type: custom:sunsynk-power-flow-card
cardstyle: compact
show_solar: true
card_height: 300px
show_grid: true
inverter:
modern: true
colour: grey
autarky: power
model: solaredge
solar:
mppts: 2
show_daily: true
max_power: 8600
pv1_max_power: 4300
pv2_max_power: 4300
display_mode: 2
efficiency: 1
battery:
energy: 15000
colour: pink
shutdown_soc: 10
show_daily: true
max_power: 5500
invert_power: true
full_capacity: 99
empty_capacity: 0
show_absolute: true
show_remaining_energy: true
hide_soc: true
load:
show_daily: true
colour: "#5fb6ad"
animation_speed: 6
max_power: 7200
additional_loads: 4
load1_name: Car
load1_icon: mdi:ev-station
load2_name: Boiler
load2_icon: mdi:water-boiler
load3_name: Farm
load3_icon: mdi:server-network
load4_name: Vent
load4_icon: mdi:hvac
dynamic_colour: true
grid:
grid_name: Мережа
off_threshold: 0
show_daily_buy: true
additional_loads: 0
show_nonessential: false
nonessential_icon: mdi:ev-station
max_power: 9000
auto_scale: true
show_daily_sell: false
entities:
inverter_voltage_154: none
load_frequency_192: none
inverter_current_164: none
inverter_power_175: none
grid_power_169: sensor.smg_output_power
battery_soc_184: sensor.jk_bms_state_of_charge
battery_power_190: sensor.jk_bms_power
grid_ct_power_172: sensor.smg_mains_power
grid_connected_status_194: binary_sensor.energy_in_sensor
no_grid_colour: green
inverter_status_59: sensor.smg_ii_operation_mode
pv1_power_186: sensor.smg_ii_pv_average_power
pv2_power_187: sensor.smg_ii_2_pv_average_power
pv1_voltage_109: none
pv1_current_110: none
pv2_voltage_111: none
pv2_current_112: none
day_pv_energy_108: sensor.soniachni_paneli
day_battery_charge_70: sensor.bms0_charging_energy_today
day_battery_discharge_71: sensor.bms0_discharging_energy_today
day_load_energy_84: sensor.solar_plus_energy_minus_battery_sensor
day_grid_import_76: sensor.spozhito_elektroenergiyi_za_sogodni
essential_load1: sensor.oncharger_power
essential_load2: sensor.ten_boiler_power
essential_load3: sensor.fermi_power
essential_load4: sensor.recuperator_power
remaining_solar: sensor.prognoz_na_sogodni
large_font: false

[slipx06]

You should provide an essential_power: sensor that measure your house load

[amgstone]

in entities: add essential_power: sensor.smg_output_power

it is not always such a difference, sometimes the values ​​are evened out

[slipx06]

What inverter are you using and which integration into HA?

[amgstone]

easun smg-ll