Arduino + RN2483 test sketch to connect to The Things Network
rn2xx3 library is used. You can get it from github.
| arduino | rn2483 | cable |
|---|---|---|
| 3.3v | 34 | red |
| GND | 33 | white |
| 12 | 32(reset) | yellow |
| 11 (software TX) | 7(RX) | blue |
| 10 (software RX) | 6(TX) | green |
Arduino + RN2483 test sketch to connect to The Things Network
rn2xx3 library is used. You can get it from github.
| arduino | rn2483 | cable |
|---|---|---|
| 3.3v | 34 | red |
| GND | 33 | white |
| 12 | 32(reset) | yellow |
| 11 (software TX) | 7(RX) | blue |
| 10 (software RX) | 6(TX) | green |