tools.txt

A registration replacement key has been created for USB Flash GUID=En registreringserstatningsnøkkel er opprettet for USB Flash GUID
About=Om
Alert Message=Varselmelding
alert=alarm
Alerts=Varsler
All Categories=Alle kategorier
An email has been sent to=En epost har blitt sendt til
and=og
Anonymize diagnostics=Anonymiser diagnosedata
Anytime=Når som helst
Archived Notifications=Arkiverte varsler
Are you sure=Er du sikker
Array has been Reset=Array har blitt **Resatt**
Array must be Started to change permissions=Arrayet må **Startes** fort å endre tilganger
Array must be Stopped to change=Array må **Stoppes** for å endres
Array slots=Array plasser
Array=Array
Author=Fotfatter
Beta=Beta
Blacklisted USB Flash GUID=Svartelistet USB enhets ID(GUID)
Branch=Gren
By using this software, you agree with our=Når du du bruker dette programmet, aksepterer du vår
Cache slots=Buffer plasser
Cannot connect to key-server=Kan ikke kontakte aktiverings-serveren
Check for Updates=Sjekk for oppdateringer
Clear Log=Tøm logg
click Install Key=Klikk <i>Installer Lisensnøkkel</i>
collecting diagnostic information this may take several minutes=samler diagnosedata(dette kan ta flere minutter)
Component=Komponent
Credits=Tilretteleggere
Data slots=Data plasser
Delete all notifications=Slett alle varsler
Delete notification=Slett varsler
Deprecated Only=Kun avviklet
Developer=Utvikler
Diagnostics=Diagnosedata
Disks=Disker
Display Settings=Vis Innstillinger
Downloading=Laster ned
End-User License Agreement=Sluttbruker avtale
Enter URL of language pack XML file=Skriv inn URL til språkpakke XML fil
Error accessing your physical USB Flash boot device=Adgangsfeil når vi prøvde din fysiske USB Flash Boot Enhet
Error reporting level=Feilrapporteringsnivå
Errors Only=Kun feil
EULA=EULA
Event=Hendelse
Expiration=Utløpsdato
Extend=Utvid
extended=utvidet
Get Trial Key=Få prøve lisens
Hardware Profile=Maskinvareprofil
Hide Details=Skjul Detaljer
If you do not receive an email, please check your spam or junk-email folder=Hvis du ikke har mottatt en epost, vennligst sjekk Søppelpost filteret ditt
Importance=Viktighet
Important=Viktig
Install Language=Innstaler Språk
Install=Innstaler
Installed languages=Innstaler Språk
Invalid Trial Installation=Ugyldig *Prøve* Innstallasjon
It will collect all of the system hardware information, remove any serial numbers, and securely upload it to LimeTech=Den vil samle all informasjon om systemets maskinvare, fjerne eventuelle serienumre og laste den opp på en sikker måte til LimeTech
Key file URL=Lisensnøkkelfil URL
Language support added=Språkstøtte lagt til
Language support deleted=Språkstøtte Fjernet
Language=Språk
Log file cleared=Loggfil slettet
Log size=Loggstørrelse
LOG size=LOG størrelse
Missing Key File=Manglende Lisensnøkkelfil
Missing Language=Manglende Språk
Network Settings=Nettverks Innstillinger
New Config=Ny konfigurasjon
New Permissions=Nye tilganger
Next=Neste
No filter=Ingen filter
No notifications present=Ingen varsler tilgjengelige
No personal information such as user names, passwords, or any other file contents is included in the hardware profile=Ingen personlig informasjon som brukernavn, passord eller annet filinnhold er inkludert i maskinvareprofilen
normal=normal
Notices Only=Kun merknader
Notices=Merknader
Only ZIP files are allowed=Kun ZIP filer er tiliatt
Page Map=Sidekart
Parity slots=Paritets plasser
PHP Info=PHP Info
PHP Information=PHP Informasjon
PHP Log File=PHP Loggfil
PHP Settings=PHP Innstillinger
Please check your=Vennligst sjekk din
please configure=vennligst konfigurer
Please provide diagnostics when experiencing problems=Vennligst oppgi diagnostikk når du opplever problemer
Please select a language before proceeding=Vennligst velg et språk før du fortsetter
Please=Vennligst
Pool slots=Pool plasser
Post these in the forums=Post disse i forumet
Preserve current assignments=Behold nåværende tildelinger
previous=foregående
Privacy Policy=Personverns avtale
Processes=Prosesser
Purchase Key=Kjøp Lisensnøkkel
Registered GUID=Registrert GUID
Registered on=Registrert på
Registered to=Registrert til
registering USB Flash GUID=Registrerer USB Flash GUID
Release has been withdrawn=Utgivelse harblitt trukket tilbake
Remove the installed language=Fjern en innstallert språkpakke
Replaceable=Utskiftbar
Request Extension=Foresrpør forlengelse
Request Trial Extension=Foresrpør **prøvetids** forlengelse
Restore=Gjenopprett
See=Se
Select language file=Velg Språkpakke
Select language=Velg Språk
Show Details=Vis Detaljer
Show errors on screen=Vis feil på skjermen
slots=plasser
Stable=Stabil
Subject=Emne
System Devices=System enheter
System Update Check=System Oppdaterings sjekk
Text=Tekst
Thank you for choosing Unraid OS=Takk for at du velger Unraid OS
Thank you for registering USB Flash GUID=Takk for at du har registert USB Flash GUID
Thank you for trying Unraid OS=Takk for at du prøver Unraid OS
The registered GUID does not match the USB Flash boot device GUID=Registrert GUID samsvarer ikke men USB Oppstartsenhetens GUID
There is a physical problem accessing your USB Flash boot device=Det er et problem med tilgang til USB Oppstartsenheten
this may take several minutes=dette kan ta flere minutter
This release has been withdrawn for use with Trial keys=Du kan ikke bruke denne versjonen med en prøvelisens
This server has %s attached storage device=Denne serveren har %s tilkoblet lagringsenhet
This server has %s attached storage devices=Denne serveren har %s tilkoblet lagringsenheter
This utility is used for troubleshooting purposes=Dette verktøyet er for feilsøking
This will delete all notification files=Dette vil **slette** alle varslingsfiler
This will delete the selected notification files=Dette vil slette de valgte varslene
This will update folder file permissions=Dette oppdaterer mappe- og filtillatelser
Time=Tid
To install a registration key, paste the key file URL in the box below and click Install Key=For å installere en registreringsnøkkel, lim inn URL-adressen til Lisensnøkkelfilen i boksen nedenfor og klikk på **Installer Lisensnøkkelfil**
to select your language=for å velge ditt språk
Trial key expires on=***Prøvelisens*** utløper den
Trial=Prøvelisens
Update OS=Oppdater Operativsystem
Upgrade Key=Oppdater Lisens
Uploaded=Lastet opp
uploading hardware information=last opp maskinvareprofilen
Uploading=Laster opp
Use this to develop language packs=Bruk dette for å utvikle Språkpakker
Use this to install official language packs=Bruk dette for å innstallere offisielle språkpakker
User Shares=Brukermapper
User=Bruker
Vars=Variabler
VFIO-PCI Log=VFIO-PCI Logg
View Log=Vis logg
View VFIO-PCI Log=Vis VFIO-PCI logg
warning=advarsel
Warnings Only=Kun advarsler
Warnings=Advarsler
webGUI=Webgrensesnitt
When received, please paste the URL into the Key file URL box and=Når du har mottatt, lim inn URL-en i <i> nøkkelfilen </i> URL-boksen og
Wrong File Extension=Feil FIL-Format
You havent sent Limetech your hardware profile yet=Du har ikke sendt Limetech maskinvareprofilen din ennå
Your hardware profile was last submitted on=Maskinvareprofilen din ble sist sendt inn den
Your Trial key has expired=Din **Prøvelisensnøkkel** har utløpt
Your Trial key requires an internet connection=Din **Prøvelisensnøkkel**krever en internettt forbindelse

; Sysdevs text - added May 18, 2020
A reboot is required to apply changes=En omstart er påkrevd
ALERT=ALARM
Bind selected to VFIO at Boot=Forbind valgte enheter til VIFO ved oppstart
CPU Thread Pairings=CPU Tråd forbindelses
Changes saved=Endringer Lagret
Function Level Reset FLR supported=Funksjonsnivå tilbakestilling (FLR) støttes
In use by Unraid=I bruk av Unraid
Kernel driver in use vfio-pci=Kjernedriver i bruk: vfio-pci
No changes=Ingen endringer
PCI Devices and IOMMU Groups=PCI-enheter og IOMMU-grupper
PCI Devices No IOMMU Groups Available=PCI-enheter (ingen IOMMU-grupper tilgjengelig)
Reboot to take effect=Omstart kreves før endringer taes i bruk
SCSI Devices=SCSI Enheter
The below list doesnt not reflect the way IOMMU would naturally group devices=Listen nedenfor gjenspeiler ikke måten IOMMU naturlig ville gruppere enheter
This controller is bound to vfio, connected USB devices are not visible=Denne kontrolleren er bundet til vfio, tilkoblede USB-enheter er ikke synlige
This controller is bound to vfio, connected drives are not visible=Denne kontrolleren er bundet til vfio, tilkoblede stasjoner er ikke synlige
To see natural IOMMU groups for your hardware, go to the VM Manager page and set the PCIe ACS override setting to Disabled=For å se naturlige IOMMU-grupper for maskinvaren din, gå til [VM Manager] -siden og sett innstillingen ** PCIe ACS overstyring ** til ** Deaktivert **
USB Devices=USB Enheter
Your system has booted with the PCIe ACS Override setting enabled=Systemet ditt har startet med innstillingen PCIe ACS Overstyring aktivert

:diagnostics_1_plug:
This utility is used for troubleshooting purposes. It will collect all of the system information and configuration files, and package these files in a single ZIP file which can be saved locally.
Subsequently, this file can be included in your correspondence with Limetech or the Unraid forum.

This will help others to quickly get the inside information of your system and provide better support to your problem. The following information
and configuration files are collected:
:end

:diagnostics_2_plug:
+ */config*
  <br>copy all *\*.cfg files*, *go* file and the *super.dat* file. These are configuration files.
+ */config/shares*
  <br>copy all *\*.cfg* files. These are user share settings files.
+ *Syslog file(s)*
  <br>copy the current *syslog* file and any previous existing *syslog* files.
+ *System*
  <br>save output of the following commands:
  <br>lsscsi, lspci, lsusb, free, lsof, ps, ethtool & ifconfig.
  <br>display of iommu groups.
  <br>display of command line parameters (e.g. pcie acs override, pci stubbing, etc).
  <br>save system variables.
+ *SMART reports*
  <br>save a SMART report of each individual disk present in your system.
+ *Docker*
  <br>save files *docker.log*, *libvirtd.log*, *libvirt/qemu/\*.log* and *vfio-pci*.
:end

:diagnostics_3_plug:
Clicking **Download** will start the collection process and then instruct your browser to save the zip file locally.

*No personal information such as user names, passwords, or any other file contents not specified above is included
by Unraid OS; however, your server name, IP address, and user share names* **will** *be included.*

*Note that 3rd-party plugins **may** or may not store personal information in plugin-specific configuration files and/or output
to the system log.*

*Use* **Anonymize diagnostics** *when publishing the diagnostics file in the public forum. In private communication with Limetech it is recommended to uncheck this setting and capture all information unaltered.*
:end

:newconfig_plug:
This is a utility to reset the array disk configuration so that all disks appear as "New" disks, as
if it were a fresh new server.

This is useful when you have added or removed multiple drives and wish to rebuild parity based on
the new configuration.

Use the *'Preserve current assignments'* selection to populate the desired disk slots ***after*** the array has been reset. By default **no** disk slots are populated.

**DO NOT USE THIS UTILITY THINKING IT WILL REBUILD A FAILED DRIVE** - it will have the opposite
effect of making it ***impossible*** to rebuild an existing failed drive - you have been warned!
:end

:newperms_1_plug:
This is a mandatory one-time action to be taken after upgrading from a pre-5.0 Unraid server release to Unraid v5 or a later release.
Select **ALL DISKS** when performing this one-time action.

This utility is also useful for restoring default ownership/permissions on files and
directories when transitioning back from Active Directory to non-Active Directory integration.

The utility starts a background process that goes to each of your data disks and cache disks and selected user shares
and changes file and directory ownership to *nobody/users* (i.e., uid/gid to 99/100), and sets permissions
as follows:
:end

:newperms_2_plug:
For directories:
  drwxrwxrwx

For read/write files:
  -rw-rw-rw-

For readonly files:
  -r--r--r--
:end

:newperms_3_plug:
Clicking **Start** will open another window and start the background process.

Closing the window before completion will terminate the background process - so don't do that. This process can take a long time if you have many files.

Note that this tool may negatively affect any docker containers if you allow your appdata share to be included.
:end

:registration_1_plug:
Your server will not be usable until you purchase a Registration key or install a free 30-day *Trial* key. A *Trial*
key provides all the functionality of a *Pro* Registration key.

Registration keys are bound to your USB Flash boot device serial number (GUID).  Please use a high quality name brand device
at least 1GB in size.

Note: USB memory card readers are generally **not** supported because most do not present unique serial numbers.
:end

:registration_2_plug:
+ Please make sure your [server time](DateTime) is accurate to within 5 minutes.
+ Please make sure there is a [DNS server](NetworkSettings) specified.
:end

:registration_3_plug:
Your *Trial* key includes all the functionality and device support of a *Pro* Registration key.

After your *Trial* key has reached expiration, your server **still functions normally** until the next time you **Stop** the array.

At that point, you may either purchase a Registration key, or request a *Trial* extension.
:end

:registration_4_plug:
To continue using Unraid OS you may purchase a Registration key. Alternately, you may request a *Trial* extension key.

Most *Trial* extension requests are processed immediately but please allow up to one business day to receive your *Trial* extension key.
:end

:registration_5_plug:
It is not possible to use a *Trial* key with an existing Unraid OS installation.

You may purchase a Registration key corresponding to this USB Flash device to continue using this installation.

For more information, please [Contact Support](https://lime-technology.com/contact).
:end

:registration_6_plug:
It appears that your Registration key file is corrupted or missing.  The key file should be located in the
[config](/Registration/Browse?dir&#61;/boot/config) directory on your USB Flash boot device.

If you do not have a backup copy of your Registration key file, [Contact Support](https://lime-technology.com/contact).

If this was a *Trial* installation, you may purchase a Registration key.
:end

:registration_7_plug:
*Trial* installations are only valid with the originally registered USB Flash device.

To continue using this installation with this USB Flash device, you may purchase a Registration key.
:end

:registration_8_plug:
The Registration key file does not correspond to the USB Flash boot device.
Please copy the correct key file to the [config](/Registration/Browse?dir&#61;/boot/config) directory
on your USB Flash boot device. If you do not have a backup copy of your key file, [Contact Support](https://lime-technology.com/contact).

If you want to replace your Registration key with a new key bound to this USB Flash device, click Replace Key below. An original key may be
replaced anytime. Thereafter, a replacement key may be replaced again after one year has passed.  If you require
another replacement key sooner, [Contact Support](https://lime-technology.com/contact).

**Note:** Replacing a Registration key results in permanently *blacklisting* the previous USB Flash GUID.
:end

:registration_9_plug:
This USB Flash boot device has been *blacklisted*. This can occur as a result of transfering your Registration key to
a replacement USB Flash device, and you are currently booted from your old USB Flash device.

A USB Flash device may also be *blacklisted* if there is no serial number, or if we discover the serial number
is not unique (this is common with USB card readers).

For more information, please [Contact Support](https://lime-technology.com/contact).
:end

; Note: December 17, 2023 - 16 missing translations
Creating Flash backup=
Creation error=
Delete Modprobe config=
Downgrade OS=
Driver=
Edit Modprobe config=
Flash backup=
Insufficient free disk space available=
Modprobed config file=Modprobe.d config file
Rebuild Modules=
Remove custom modprobed configuration=Remove custom modprobe.d configuration?
Save Modprobe config=
Select View=
State=
Support page=
System Drivers=