v1.0.20231125beta

Breaking changes

• Driver version greater or equal to v1.0.20230629beta and smaller or equal to v1.0.20230926beta:

  With v1.0.20230927beta the following values changed names:

  • BULK_CELL_VOLTAGE -> SOC_RESET_VOLTAGE
  • BULK_AFTER_DAYS -> SOC_RESET_AFTER_DAYS

What's Changed since v1.0.20230531

• Added: Bluetooth: Show signal strength of BMS in log by @mr-manuel
• Added: Configure logging level in config.ini by @mr-manuel
• Added: Create unique identifier, if not provided from BMS by @mr-manuel
• Added: Current average of the last 5 minutes by @mr-manuel
• Added: Daly BMS - Auto reset SoC when changing to float (can be turned off in the config file) by @transistorgit
• Added: Daly BMS connect via CAN (experimental, some limits apply) with #169 by @SamuelBrucksch and @mr-manuel
• Added: Exclude a device from beeing used by the dbus-serialbattery driver by @mr-manuel
• Added: Implement callback function for update by @seidler2547
• Added: JKBMS BLE - Automatic SOC reset with #736 by @ArendsM
• Added: JKBMS BLE - Show last five characters from the MAC address in the custom name (which is displayed in the device list) by @mr-manuel
• Added: JKBMS BMS connect via CAN (experimental, some limits apply) by @IrisCrimson and @mr-manuel
• Added: LLT/JBD BMS - Discharge / Charge Mosfet and disable / enable balancer switching over remote console/GUI with #761 by @idstein
• Added: LLT/JBD BMS - Show balancer state in GUI under the IO page with #763 by @idstein
• Added: Load to SOC reset voltage every x days to reset the SoC to 100% for some BMS by @mr-manuel
• Added: Save custom name and make it restart persistant by @mr-manuel
• Added: Temperature names to dbus and mqtt by @mr-manuel
• Added: Use current average of the last 300 cycles for time to go and time to SoC calculation by @mr-manuel
• Added: Validate current, voltage, capacity and SoC for all BMS. This prevents that a device, which is no BMS, is detected as BMS. Fixes also #479 by @mr-manuel
• Changed: VOLTAGE_DROP now behaves differently. Before it reduced the voltage for the check, now the voltage for the charger is increased in order to get the target voltage on the BMS by @mr-manuel
• Changed: Daly BMS - Fix readsentence by @transistorgit
• Changed: Daly BMS - Fixed #837 by @mr-manuel
• Changed: Enable BMS that are disabled by default by specifying it in the config file. No more need to edit scripts by @mr-manuel
• Changed: Fixed Building wheel for dbus-fast won't finish on weak systems #785 by @mr-manuel
• Changed: Fixed error in reinstall-local.sh script for Bluetooth installation by @mr-manuel
• Changed: Fixed meaningless Time to Go values by @transistorgit
• Changed: Fixed typo in config.ini sample by @hoschult
• Changed: For BMS_TYPE now multiple BMS can be specified by @mr-manuel
• Changed: Improved battery error handling on connection loss by @mr-manuel
• Changed: Improved battery voltage handling in linear absorption mode by @ogurevich
• Changed: Improved driver disable script by @md-manuel
• Changed: Improved driver reinstall when multiple Bluetooth BMS are enabled by @mr-manuel
• Changed: JKBMS - Driver do not start if manufacturer date in BMS is empty #823 by @mr-manuel
• Changed: JKBMS_BLE BMS - Fixed MOSFET Temperature for HW 11 by @jensbehrens & @mr-manuel
• Changed: JKBMS_BLE BMS - Fixed recognition of newer models where no data is shown by @mr-manuel
• Changed: JKBMS_BLE BMS - Improved driver by @seidler2547 & @mr-manuel
• Changed: LLT/JBD BMS - Fix cycle capacity with #762 by @idstein
• Changed: LLT/JBD BMS - Fixed #730 by @mr-manuel
• Changed: LLT/JBD BMS - Fixed #769 by @mr-manuel
• Changed: LLT/JBD BMS - Fixed #778 with #798 by @idstein
• Changed: LLT/JBD BMS - Improved error handling and automatical driver restart in case of error. Fixed #777 by @mr-manuel
• Changed: LLT/JBD BMS - SOC different in Xiaoxiang app and dbus-serialbattery with #760 by @idstein
• Changed: Make CCL and DCL limiting messages more clear by @mr-manuel
• Changed: Reduce the big inrush current if the CVL jumps from Bulk/Absorbtion to Float #659 by @Rikkert-RS & @ogurevich
• Changed: Sinowealth BMS - Fix not loading #702 by @mr-manuel
• Changed: Time-to-Go and Time-to-SoC use the current average of the last 5 minutes for calculation by @mr-manuel
• Changed: Time-to-SoC calculate only positive points by @mr-manuel
• Removed: Cronjob to restart Bluetooth service every 12 hours by @mr-manuel

Full Changelog: v1.0.20230531...1.0.20231125beta