fix: Modified the relay page content

Seeed-Studio · Jan 8, 2025 · f42d896 · f42d896
1 parent 540f611
commit f42d896
Show file tree

Hide file tree

Showing 2 changed files with 2 additions and 10 deletions.
diff --git a/docs/Sensor/SeeedStudio_XIAO_Gadgets/2_Channel_Wi_Fi_AC_Relay_Module.md b/docs/Sensor/SeeedStudio_XIAO_Gadgets/2_Channel_Wi_Fi_AC_Relay_Module.md
@@ -112,7 +112,7 @@ Always disconnect AC power before wiring the relay. Avoid using the USB port whi
 
 ### Step 1: Set Up the Relay Module (Physical Setup)
 
-1. **Installation**: homeassistant is already pre-installed in Home Assistant Green.
+1. **Installation**: homeassistant is already pre-installed in [Home Assistant Green](https://www.seeedstudio.com/Home-Assistant-Green-p-5792.html).
 2. **Enabling ESPHome Add-on**:
    - Access the Home Assistant dashboard.
    - Navigate to the "Add-ons" section and search for the ESPHome add-on.
@@ -123,14 +123,6 @@ Always disconnect AC power before wiring the relay. Avoid using the USB port whi
 
 By gathering the necessary components and setting up Home Assistant with the ESPHome add-on, you'll be ready to proceed with the integration of the 2-Channel Wi-Fi AC Relay Module.
 
-:::tip install Home Assistant
-We have also written how to install Home Assistant for some of Seeed Studio products, please refer to them.
-
-- [Getting Started with Home Assistant on ODYSSEY-X86](/ODYSSEY-X86-Home-Assistant)
-- [Getting Started with Home Assistant on reTerminal](/reTerminal_Home_Assistant)
-- [Getting Started with Home Assistant on LinkStar H68K/reRouter CM4](/h68k-ha-esphome)
-:::
-
 ### Step 2: Preparing the Relay Module
 
 By default, your device (XIAO ESP32C3) comes pre-flashed with firmware for 2-Channel Wi-Fi AC Relay Module. However, there are two scenarios where you may need to update the firmware:

diff --git a/docs/Sensor/SeeedStudio_XIAO_Gadgets/6_Channel_Wi_Fi_Relay_Module.md b/docs/Sensor/SeeedStudio_XIAO_Gadgets/6_Channel_Wi_Fi_Relay_Module.md
@@ -116,7 +116,7 @@ Voltages exceeding 24V may cause electric shock or burns, especially in cases of
 
 ### Step 1: Setting Up Home Assistant {#setting-up-home-assistant}
 
-1. **Installation**: homeassistant is already pre-installed in Home Assistant Green.
+1. **Installation**: homeassistant is already pre-installed in [Home Assistant Green](https://www.seeedstudio.com/Home-Assistant-Green-p-5792.html).
 2. **Enabling ESPHome Add-on**:
    - Access the Home Assistant dashboard.
    - Navigate to the "Add-ons" section and search for the ESPHome add-on.