Update ecomet I2C Slave Ic

ecomet_i2c_sensors/axp305/axp305.py

@@ -0,0 +1,254 @@
+from __future__ import division
+import logging
+import time
+import math
+import numpy as np
+from ecomet_i2c_sensors.axp209 import axp209_constant
+from ctypes import c_uint8, BigEndianStructure, Union
+
+reg_list = { 'POWER_OPERATING_MODE_REG' : axp209_constant.POWER_OPERATING_MODE_REG, 'POWER_INPUT_STATUS_REG' : axp209_constant.POWER_INPUT_STATUS_REG,
+             'BATTERY_GAUGE_REG' : axp209_constant.BATTERY_GAUGE_REG,
+             'INTERNAL_TEMPERATURE_REG' : axp209_constant.INTERNAL_TEMPERATURE_REG, 'BATTERY_VOLTAGE_REG' : axp209_constant.BATTERY_VOLTAGE_REG,
+             'BATTERY_CHARGE_CURRENT_REG' : axp209_constant.BATTERY_CHARGE_CURRENT_REG,
+             'BATTERY_DISCHARGE_CURRENT_REG' : axp209_constant.BATTERY_DISCHARGE_CURRENT_REG, 'BATTERY_VOLTAGE_REG' : axp209_constant.BATTERY_VOLTAGE_REG,
+             'VBUS_IPSOUT_CHANNEL_MANAGEMENT_REG' : axp209_constant.VBUS_IPSOUT_CHANNEL_MANAGEMENT_REG,
+             'ADC_ENABLE1_REG' : axp209_constant.ADC_ENABLE1_REG, 'ADC_ENABLE2_REG' : axp209_constant.ADC_ENABLE2_REG
+        }
+
+logger = logging.getLogger(__name__)
+
+class AXP209(object):
+    '''axp209() Power Management  Controller'''
+
+    def __init__(self, address=axp209_constant.AXP209_ADDRESS, busnum=None, i2c=None, **kwargs) :
+        '''Initialize the axp209.'''
+        # Setup I2C interface for the device.
+        if i2c is None:
+            import ecomet_i2c_sensors.i2c as I2C
+            i2c = I2C
+        self._logger = logging.getLogger(__name__)    
+        self._device = i2c.get_i2c_device(address, busnum=busnum, i2c_interface='smbus2', **kwargs)
+        #i2c_interface parameter choise smbus2 lib insted of Adafruit PureIO
+
+        # force ADC enable for battery voltage and current
+        self.adc_enable1 = 0xc3
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exc_type, exc_val, exc_tb):
+        if self.autocleanup:
+            self.close()
+
+    def close(self):
+        self._device.close()
+
+    @property
+    def gpio2_output(self):
+        pass
+
+    @gpio2_output.setter
+    def gpio2_output(self, val):
+        flags = GPIO012_FEATURE_SET_FLAGS()
+        if bool(val):
+            flags.gpio_function = 0b111
+        else:
+            flags.gpio_function = 0b000
+        self.write_register('ADC_ENABLE1_REG', flags.asbyte)
+
+    @property
+    def adc_enable1(self):
+        flags = axp209_constant.ADC_ENABLE1_FLAGS()
+        (flags.asbyte,ret) = self.read_register('ADC_ENABLE1_REG')
+        return flags
+
+    @adc_enable1.setter
+    def adc_enable1(self, flags):
+        if hasattr(flags, "asbyte"):
+            flags = flags.asbyte
+        self.write_register('ADC_ENABLE1_REG', flags)
+
+    @property
+    def adc_enable2(self):
+        flags = axp209_constant.ADC_ENABLE2_FLAGS()
+        (flags.asbyte,ret) = self.read_register('ADC_ENABLE2_REG')
+        return flags
+
+    @adc_enable2.setter
+    def adc_enable2(self, flags):
+        if hasattr(flags, "asbyte"):
+            flags = flags.asbyte
+        self.write_register('ADC_ENABLE2_REG', flags)
+
+    @property
+    def vbus_current_limit(self):
+        """ Returns the current vbus current limit setting """
+        limits = { #00:900 mA; 01:500 mA; 10:100 mA; 11: not limit
+            0: "900 mA",
+            1: "500 mA",
+            2: "100 mA",
+            3: "not limited",
+        }
+        (current_data,ret) = self.read_register('VBUS_IPSOUT_CHANNEL_MANAGEMENT_REG')
+        current_limit = current_data & 0x03
+        return limits.get(current_limit, "invalid setting")
+
+    @vbus_current_limit.setter
+    def vbus_current_limit(self, val):
+        flags = axp209_constant.VBUS_CURRENT_LIMIT_CONTROL()
+        limits = { #00:900 mA; 01:500 mA; 10:100 mA; 11: not limit
+            0: "900 mA",
+            1: "500 mA",
+            2: "100 mA",
+            3: "no limit",
+        }
+        for setting, limit in limits.items():
+            if limit == val :
+                (flags.asbyte,ret) = self.read_register('VBUS_IPSOUT_CHANNEL_MANAGEMENT_REG')
+                flags.vbus_current_limit = setting
+        self.write_register('VBUS_IPSOUT_CHANNEL_MANAGEMENT_REG', flags.asbyte)
+
+    @property
+    def power_input_status(self):
+        flags = axp209_constant.POWER_INPUT_STATUS_FLAGS()
+        (flags.asbyte,ret) = self.read_register('POWER_INPUT_STATUS_REG')
+        return flags
+
+    @property
+    def battery_current_direction(self):
+        return bool(self.power_input_status.battery_current_direction)
+
+    @property
+    def power_operating_mode(self):
+        flags = axp209_constant.POWER_OPERATING_STATUS_FLAGS()
+        (flags.asbyte,ret) = self.read_register('POWER_OPERATING_MODE_REG')
+        return flags
+
+    # ADC_ENABLE1 REGISTER status
+    @property
+    def battery_current_adc_enable(self):
+        return bool(self.adc_enable1.battery_current_adc_enable)
+
+    @property
+    def acin_voltage_adc_enable(self):
+        return bool(self.adc_enable1.acin_voltage_adc_enable)
+
+    @property
+    def acin_current_adc_enable(self):
+        return bool(self.adc_enable1.acin_current_adc_enable)
+
+    @property
+    def vbus_voltage_adc_enable(self):
+        return bool(self.adc_enable1.vbus_voltage_adc_enable)
+
+    @property
+    def vbus_current_adc_enable(self):
+        return bool(self.adc_enable1.vbus_current_adc_enable)
+
+    @property
+    def aps_voltage_adc_enable(self):
+        return bool(self.adc_enable1.aps_voltage_adc_enable)
+
+    @property
+    def ts_pin_adc_function_enable(self):
+        return bool(self.adc_enable1.ts_pin_adc_function_enable)
+
+    # TBD_ENABLE2_REGISTER status
+    @property
+    def apx209_internal_temperature_monitoring_adc_enable(self):
+        return bool(self.adc_enable2.apx209_internal_temperature_monitoring_adc_enable)
+
+    @property
+    def gpio0_adc_function_enable(self):
+        return bool(self.adc_enable2.gpio0_adc_function_enable)
+
+    @property
+    def gpio1_adc_function_enable(self):
+        return bool(self.adc_enable2.gpio1_adc_function_enable)
+    #    
+    @property
+    def battery_exists(self):
+        return bool(self.power_operating_mode.battery_exists)
+
+    @property
+    def battery_charging(self):
+        return bool(self.power_operating_mode.battery_charging)
+
+    @property
+    def battery_voltage(self):
+        """ Returns voltage in mV """
+        (voltage_bin,ret) = self.read_register('BATTERY_VOLTAGE_REG')
+        return voltage_bin * 1.1
+
+    @property
+    def battery_charge_current(self):
+        """ Returns current in mA """
+        (charge_bin,ret) = self.read_register('BATTERY_CHARGE_CURRENT_REG')
+        # (12 bits)
+        # 0 mV -> 000h,	0.5 mA/bit	FFFh -> 1800 mA
+        return charge_bin * 0.5
+
+    @property
+    def battery_discharge_current(self):
+        """ Returns current in mA """
+        (discharge_bin,ret) = self.read_register('BATTERY_DISCHARGE_CURRENT_REG')
+        # 13bits
+        # 0 mV -> 000h,	0.5 mA/bit	1FFFh -> 1800 mA
+        return discharge_bin * 0.5
+
+    @property
+    def internal_temperature(self):
+        """ Returns temperature in celsius C """
+        (temp,ret) = self.read_register('INTERNAL_TEMPERATURE_REG')
+        # MSB is 8 bits, LSB is lower 4 bits
+        # -144.7c -> 000h,	0.1c/bit	FFFh -> 264.8c
+        return temp*0.1-144.7
+
+    @property
+    def battery_gauge(self):
+        (gauge_bin,ret) = self.read_register('BATTERY_GAUGE_REG')
+        gauge = gauge_bin & 0x7f
+        if gauge > 100:
+            return -1
+        return gauge
+
+    def read_register(self, register) :
+        reg_status = -9999
+        ret = 0
+        if register in ['INTERNAL_TEMPERATURE_REG','BATTERY_VOLTAGE_REG','BATTERY_CHARGE_CURRENT_REG'] :
+           try :
+			  # 12 bit
+              reg_status_bita = self._device.readList(reg_list[register],2)
+              reg_status_hex_high = reg_status_bita[0]
+              reg_status_hex_low = reg_status_bita[1]
+              reg_status = reg_status_hex_high << 4 | reg_status_hex_low & 0x0f
+           except :
+              ret = ret + 1
+        elif register in ['BATTERY_DISCHARGE_CURRENT_REG'] :
+           try :
+			  # 13 bit
+              reg_status_bita = self._device.readList(reg_list[register],2)
+              reg_status_hex_high = reg_status_bita[0]
+              reg_status_hex_low = reg_status_bita[1]
+              reg_status = reg_status_hex_high << 5 | reg_status_hex_low & 0x1f
+           except :
+              ret = ret + 1
+        elif register in ['POWER_OPERATING_MODE_REG','POWER_INPUT_STATUS_REG','BATTERY_GAUGE_REG','BATTERY_GAUGE_REG','VBUS_IPSOUT_CHANNEL_MANAGEMENT_REG',
+                          'ADC_ENABLE1_REG','ADC_ENABLE2_REG'] :
+           try :
+              reg_status = self._device.readU8(reg_list[register])
+           except :
+              ret = ret + 1
+        return(reg_status,ret)
+
+    def write_register(self, register,data) :
+        ret = 0
+        #print ( register )
+        if register in ['VBUS_IPSOUT_CHANNEL_MANAGEMENT_REG','ADC_ENABLE1_REG','ADC_ENABLE2_REG'] :
+           self._device.write8(reg_list[register],data)
+           try :
+              self._device.write8(reg_list[register],data)
+           except :
+              ret = ret + 1
+        return (ret)
+

ecomet_i2c_sensors/axp305/axp305_constant.py

@@ -0,0 +1,143 @@
+from ctypes import c_uint8, BigEndianStructure, Union
+
+# Address:
+AXP209_ADDRESS     = 0x34   # 8 bit version
+
+# from CHIP battery.sh script
+POWER_INPUT_STATUS_REG 				= 0x00
+POWER_OPERATING_MODE_REG 			= 0x01
+CHARGE_CONTROL_REG 					= 0x33
+CHARGE_CONTROL2_REG 				= 0x34
+ADC_ENABLE1_REG 					= 0x82
+ADC_ENABLE2_REG						= 0x83
+INTERNAL_TEMPERATURE_REG 			= 0x5e
+BATTERY_VOLTAGE_REG 				= 0x78
+BATTERY_CHARGE_CURRENT_REG 			= 0x7a
+BATTERY_DISCHARGE_CURRENT_REG 		= 0x7c
+GPIO0_FEATURE_SET_REG 				= 0x90
+GPIO1_FEATURE_SET_REG 				= 0x92
+GPIO2_FEATURE_SET_REG 				= 0x93
+BATTERY_GAUGE_REG 					= 0xb9
+VBUS_IPSOUT_CHANNEL_MANAGEMENT_REG 	= 0X30
+
+# POWER_OPERATING_MODE_REG Bits:
+class POWER_OPERATING_STATUS_FLAGS(Union):
+    class _b(BigEndianStructure):
+        _fields_ = [
+            ("over-temperature", c_uint8, 1), 	# instruct  AXP209 Is it overheated? 0:Not too warm ； 1:Overtemperature
+            ("battery_charging", c_uint8, 1),  	# Charging instructions 
+												# 0:Not charging or charging completed ； 1:Charging
+            ("battery_exists", c_uint8, 1),		# Battery presence status indication 
+												# 0:No battery connected to  AXP209； 1:The battery is connected to  AXP209
+            ("_reserved_", c_uint8, 1),	
+            ("battery_active", c_uint8, 1),		# Indicates whether the battery has entered activation mode 
+												# 0:Not entering battery activation mode ； 1:Entered battery activation mode
+            ("reached_desired_charge_current", c_uint8, 1),		# Indicates whether the charging current is less than the expected current 
+												# 0:The actual charging current is equal to the expected current ； 1:The actual charging current is less than the expected current 
+            ("_reserved_", c_uint8, 2),
+        ]
+
+    _fields_ = [("_b", _b),
+                ("asbyte", c_uint8)]
+
+    _anonymous_ = ("_b",)
+
+class POWER_INPUT_STATUS_FLAGS(Union):
+    class _b(BigEndianStructure):
+        _fields_ = [
+            ("acin_present", c_uint8, 1),
+            ("acin_available", c_uint8, 1),
+            ("vbus_present", c_uint8, 1),
+            ("vbus_available", c_uint8, 1),
+            ("vbus_direction", c_uint8, 1),
+            ("battery_current_direction", c_uint8, 1),  # 1: charging, 0: discharging
+            ("acin_vbus_shorted", c_uint8, 1),
+            ("start_source", c_uint8, 1)
+        ]
+
+    _fields_ = [("_b", _b),
+                ("asbyte", c_uint8)]
+
+    _anonymous_ = ("_b",)
+
+
+class POWER_OPERATING_STATUS_FLAGS(Union):
+    class _b(BigEndianStructure):
+        _fields_ = [
+            ("over-temperature", c_uint8, 1),
+            ("battery_charging", c_uint8, 1),  # 1: charging, 0: not charging or charging done
+            ("battery_exists", c_uint8, 1), # 1: battery is connected, 0: not connected
+            ("_reserved_", c_uint8, 1),
+            ("battery_active", c_uint8, 1),
+            ("reached_desired_charge_current", c_uint8, 1),
+            ("_reserved_", c_uint8, 2),
+        ]
+
+    _fields_ = [("_b", _b),
+                ("asbyte", c_uint8)]
+
+    _anonymous_ = ("_b",)
+
+
+class GPIO012_FEATURE_SET_FLAGS(Union):
+    class _b(BigEndianStructure):
+        _fields_ = [
+            ("gpio_rising_edge_interupt", c_uint8, 1),
+            ("gpio_falling_edge_interupt", c_uint8, 1),
+            ("_reserved_", c_uint8, 3),
+            ("gpio_function", c_uint8, 3),
+        ]
+
+    _fields_ = [("_b", _b),
+                ("asbyte", c_uint8)]
+
+    _anonymous_ = ("_b",)
+
+
+class VBUS_CURRENT_LIMIT_CONTROL(Union):
+    class _b(BigEndianStructure):
+        _fields_ = [
+            ("vbus_available", c_uint8, 1),
+            ("hold_pressure_limiting", c_uint8, 1),
+            ("hold_set_up", c_uint8, 3),
+            ("_reserved_", c_uint8, 1),
+            ("vbus_current_limit", c_uint8, 2),
+        ]
+
+    _fields_ = [("_b", _b),
+                ("asbyte", c_uint8)]
+
+    _anonymous_ = ("_b",)
+
+class ADC_ENABLE1_FLAGS(Union):
+    class _b(BigEndianStructure):
+        _fields_ = [
+            ("battery_voltage_adc_enable", c_uint8, 1),
+            ("battery_current_adc_enable", c_uint8, 1),
+            ("acin_voltage_adc_enable", c_uint8, 1),
+            ("acin_current_adc_enable", c_uint8, 1),
+            ("vbus_voltage_adc_enable", c_uint8, 1),
+            ("vbus_current_adc_enable", c_uint8, 1),
+            ("aps_voltage_adc_enable", c_uint8, 1),
+            ("ts_pin_adc_function_enable", c_uint8, 1),
+        ]
+
+    _fields_ = [("_b", _b),
+                ("asbyte", c_uint8)]
+
+    _anonymous_ = ("_b",)
+
+class ADC_ENABLE2_FLAGS(Union):
+    class _b(BigEndianStructure):
+        _fields_ = [
+            ("apx209_internal_temperature_monitoring_adc_enable", c_uint8, 1),
+            ("_reserved_", c_uint8, 3),
+            ("gpio0_adc_function_enable", c_uint8, 1),
+            ("gpio1_adc_function_enable", c_uint8, 1),
+            ("_reserved_", c_uint8, 2),
+        ]
+
+    _fields_ = [("_b", _b),
+                ("asbyte", c_uint8)]
+
+    _anonymous_ = ("_b",)