BLE only AP (OpenEPaperLink#313)

Add BLE only AP option

Fix some smaller stuff

.github/workflows/conditional-build-test.yml

@@ -1,4 +1,4 @@
-name: FW Build / Test (Conditional Job PoC)
+name: FW Build / Test
 
 on: [push, pull_request]
 

.github/workflows/release.yml

@@ -41,6 +41,16 @@ jobs:
         run: |
           mkdir espbinaries
 
+      - name: esp-idf build
+        uses: espressif/esp-idf-ci-action@v1
+        with:
+          esp_idf_version: latest
+          target: esp32c6
+          path: 'ARM_Tag_FW/OpenEPaperLink_esp32_C6_AP/'
+
+      - name: Add C6 files to release
+        run: |
+          cp /home/runner/work/OpenEPaperLink/OpenEPaperLink/ARM_Tag_FW/OpenEPaperLink_esp32_C6_AP/build/OpenEPaperLink_esp32_C6.bin espbinaries/OpenEPaperLink_esp32_C6.bin
 #      - name: Zip web files
 #        run: | 
 #            cd /home/runner/work/OpenEPaperLink/OpenEPaperLink/ESP32_AP-Flasher
@@ -176,6 +186,24 @@ jobs:
           cp OpenEPaperLink_Mini_AP_v4/firmware.bin espbinaries/OpenEPaperLink_Mini_AP_v4.bin
           cp OpenEPaperLink_Mini_AP_v4/merged-firmware.bin espbinaries/OpenEPaperLink_Mini_AP_v4_full.bin
 
+      - name: Build firmware for BLE_ONLY_AP
+        run: |
+          cd ESP32_AP-Flasher
+          export PLATFORMIO_BUILD_FLAGS="-D BUILD_VERSION=${{ github.ref_name }} -D SHA=$GITHUB_SHA"
+          pio run --environment BLE_ONLY_AP
+          pio run --target buildfs --environment BLE_ONLY_AP
+          mkdir /home/runner/work/OpenEPaperLink/OpenEPaperLink/BLE_ONLY_AP
+          cp ~/.platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin /home/runner/work/OpenEPaperLink/OpenEPaperLink/BLE_ONLY_AP/boot_app0.bin
+          cp .pio/build/BLE_ONLY_AP/firmware.bin /home/runner/work/OpenEPaperLink/OpenEPaperLink/BLE_ONLY_AP/firmware.bin
+          cp .pio/build/BLE_ONLY_AP/bootloader.bin /home/runner/work/OpenEPaperLink/OpenEPaperLink/BLE_ONLY_AP/bootloader.bin
+          cp .pio/build/BLE_ONLY_AP/partitions.bin /home/runner/work/OpenEPaperLink/OpenEPaperLink/BLE_ONLY_AP/partitions.bin
+          cp .pio/build/BLE_ONLY_AP/littlefs.bin /home/runner/work/OpenEPaperLink/OpenEPaperLink/BLE_ONLY_AP/littlefs.bin
+          cd /home/runner/work/OpenEPaperLink/OpenEPaperLink/BLE_ONLY_AP
+          esptool.py --chip esp32-s3 merge_bin -o merged-firmware.bin --flash_mode dio --flash_freq 80m --flash_size 16MB 0x0000 bootloader.bin 0x8000 partitions.bin 0xe000 boot_app0.bin 0x10000 firmware.bin 0x00910000 littlefs.bin
+          cd /home/runner/work/OpenEPaperLink/OpenEPaperLink
+          cp BLE_ONLY_AP/firmware.bin espbinaries/BLE_ONLY_AP.bin
+          cp BLE_ONLY_AP/merged-firmware.bin espbinaries/BLE_ONLY_AP_full.bin
+          
       - name: generate release json file
         run: |
           mkdir jsonfiles

ESP32_AP-Flasher/platformio.ini

@@ -308,6 +308,54 @@ board_build.psram_type=qspi_opi
 board_upload.maximum_size = 16777216
 board_upload.maximum_ram_size = 327680
 board_upload.flash_size = 16MB
+
+; ----------------------------------------------------------------------------------------
+; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
+; ----------------------------------------------------------------------------------------
+[env:BLE_ONLY_AP]
+board = esp32-s3-devkitc-1
+board_build.partitions = large_spiffs_16MB.csv
+build_unflags =
+	-std=gnu++11
+    -D ARDUINO_USB_MODE=1
+    -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
+lib_deps =
+    ${env.lib_deps}
+build_flags = 
+	-std=gnu++17
+	${env.build_flags}
+	-D CORE_DEBUG_LEVEL=0
+	-D ARDUINO_USB_MODE=0
+	-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
+	-D CONFIG_SPIRAM_USE_MALLOC=1
+	-D POWER_NO_SOFT_POWER
+	-D BOARD_HAS_PSRAM
+	-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
+	-D HAS_BLE_WRITER
+	-D FLASHER_AP_SS=-1
+	-D FLASHER_AP_CLK=-1
+	-D FLASHER_AP_MOSI=-1
+	-D FLASHER_AP_MISO=-1
+	-D FLASHER_AP_RESET=-1
+	-D FLASHER_AP_POWER={-1}
+	-D FLASHER_AP_TEST=-1
+	-D FLASHER_AP_TXD=-1
+	-D FLASHER_AP_RXD=-1
+	-D FLASHER_DEBUG_TXD=-1
+	-D FLASHER_DEBUG_RXD=-1
+	-D FLASHER_DEBUG_PROG=-1
+	-D FLASHER_LED=-1
+	-D HAS_RGB_LED
+	-D FLASHER_RGB_LED=48
+	-D BLE_ONLY
+build_src_filter = 
+	+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>-<espflasher.cpp>
+board_build.flash_mode=qio
+board_build.arduino.memory_type = qio_opi
+board_build.psram_type=qspi_opi
+board_upload.maximum_size = 16777216
+board_upload.maximum_ram_size = 327680
+board_upload.flash_size = 16MB
 ; ----------------------------------------------------------------------------------------
 ; !!! this configuration expects the PoE-AP and is work in progress right now !!!
 ; ----------------------------------------------------------------------------------------

ESP32_AP-Flasher/src/ble_writer.cpp

@@ -7,7 +7,6 @@
 
 #define INTERVAL_BLE_SCANNING_SECONDS 60
 #define INTERVAL_HANDLE_PENDING_SECONDS 10
-
 #define BUFFER_MAX_SIZE_COMPRESSING 100000
 
 #define BLE_MAIN_STATE_IDLE 0

ESP32_AP-Flasher/src/serialap.cpp

@@ -150,6 +150,9 @@ void setAPstate(bool isOnline, uint8_t state) {
         CRGB::Red,
         CRGB::YellowGreen};
     rgbIdleColor = colorMap[state];
+    #ifdef BLE_ONLY
+        rgbIdleColor = CRGB::Green;
+    #endif
     rgbIdlePeriod = (isOnline ? 767 : 255);
     if (isOnline) rgbIdle();
 #endif
@@ -744,6 +747,9 @@ void segmentedShowIp() {
 }
 
 bool bringAPOnline() {
+    #ifndef BLE_ONLY
+    apInfo.state = AP_STATE_NORADIO;
+    #endif
     if (apInfo.state == AP_STATE_NORADIO) return true;
     if (apInfo.state == AP_STATE_FLASHING) return false;
     setAPstate(false, AP_STATE_OFFLINE);
@@ -788,9 +794,12 @@ bool bringAPOnline() {
 }
 
 bool checkRadio() {
-#ifndef C6_OTA_FLASHING
+    #ifdef BLE_ONLY
+    return false;
+    #endif
+    #ifndef C6_OTA_FLASHING
     return true;
-#endif
+    #endif
     // make a short between FLASHER_AP_TXD and FLASHER_AP_RXD to indicate that no radio is present
     // e.g. for flasher only, or just to use the S3 to generate images for smaller AP's
     pinMode(FLASHER_AP_TXD, OUTPUT);
@@ -1017,4 +1026,4 @@ void APTask(void* parameter) {
         }
         vTaskDelay(1000 / portTICK_PERIOD_MS);
     }
-}
+}

ESP32_AP-Flasher/src/tag_db.cpp

@@ -331,6 +331,9 @@ void initAPconfig() {
     config.sleepTime1 = APconfig.containsKey("sleeptime1") ? APconfig["sleeptime1"] : 0;
     config.sleepTime2 = APconfig.containsKey("sleeptime2") ? APconfig["sleeptime2"] : 0;
     config.ble = APconfig.containsKey("ble") ? APconfig["ble"] : 0;
+    #ifdef BLE_ONLY
+    config.ble = true;
+    #endif
     // default wifi power 8.5 dbM
     // see https://github.com/espressif/arduino-esp32/blob/master/libraries/WiFi/src/WiFiGeneric.h#L111
     config.wifiPower = APconfig.containsKey("wifipower") ? APconfig["wifipower"] : 34;

README.md

@@ -1,21 +1,10 @@
 # OpenEPaperLink
 
-This is an alternative firmware and protocol for the ZBS243-based Electronic Shelf Labels - ESL / price tags by Solum / Samsung. It can be used to setup E-Paper tags and supply them with content.
+This is an alternative firmware and protocol for the multiple Electronic Shelf Labels. It can be used to setup E-Paper tags and supply them with content.
 
 The software in this project consists of two parts: Accesspoint-firmware and Tag firmware.
 Additionally, there are various hardware designs for accesspoints and flasher-interfaces to program the tags, preferably using programming jigs
 
-<img width="400" alt="board" src="https://user-images.githubusercontent.com/2544995/227208651-993d11a2-380f-44ae-847c-f8d90296c8cf.png">
-
-## Compatibility
-It is currently compatible with the following tags:
-* 4.2"
-* 2.9"
-* 1.54"
-* Segmented (work in progress)
-
-On the 2.9" tags, both the UC8151 and SSD1619 display variants are supported
-
 ## Aims
 - Low power (currently around 9µA with a minimum of 40 second latency)
 - Even lower power when there's no AP around
@@ -72,10 +61,10 @@ After programming the ESP32, make sure to also program the filesystem. This will
 Hats off to these legends!
 
 ## Automated Builds
-- After a PR gets merged to the main branch, the ESP32 code will automatically be compiled.
+- After a PR gets merged to the main branch, the changed code will be compiled.
 - On release, files are added to enable OTA
 
-![Test](https://github.com/jjwbruijn/OpenEPaperLink/actions/workflows/build-test.yml/badge.svg)
+![Test](https://github.com/jjwbruijn/OpenEPaperLink/actions/workflows/conditional-build-test.yml/badge.svg)
 
 ![Release](https://github.com/jjwbruijn/OpenEPaperLink/actions/workflows/release.yml/badge.svg)