Merge pull request #40 from multani/sphinx-doc

Convert the documentation from Lore to Sphinx

.travis.yml

@@ -27,26 +27,42 @@ install:
         # some of that mangling here.
         pip install dist/Nevow-"$(python setup.py --version | tr - _)"-py27-none-any.whl
 
+        # Also install the extra documentation requirements.  Unfortunately, it
+        # seems pip doesn't automatically handle that case when installing from
+        # a built file.
+        pip install Sphinx
+
     elif [ "${MODE}" == "sdist" ]; then
         # Build and install a normal source distribution
         python setup.py sdist
         pip install dist/Nevow-"$(python setup.py --version)".tar.gz
 
+        # Also install the extra documentation requirements.  Unfortunately, it
+        # seems pip doesn't automatically handle that case when installing from
+        # a built file.
+        pip install Sphinx
+
     elif [ "${MODE}" == "inplace" ]; then
         # Don't actually install anything.  Just update the environment to make
         # the source in the git checkout importable.  Then run the tests
         # directly against that.  This is kind of a "control" case.  These
         # results should be very similar to the results for any of the
         # installation cases.
+        # Note that we also install the documentation requirements.
 
-        pip install --editable .
+        pip install --editable '.[doc]'
 
     elif [ "${MODE}" == "source" ]; then
 
         # Install directly from the git checkout.
-        pip install .
+        pip install '.'
+
+        # Also install the extra documentation requirements.  Unfortunately, it
+        # seems this can't be specified to the install command above.
+        pip install Sphinx
 
     fi
 
 script:
   - "trial formless nevow"
+  - "cd doc; make html"

doc/Makefile

@@ -0,0 +1,177 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = build
+
+# User-friendly check for sphinx-build
+ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
+$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
+endif
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
+
+help:
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  xml        to make Docutils-native XML files"
+	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+
+clean:
+	rm -rf $(BUILDDIR)/*
+
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Nevow.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Nevow.qhc"
+
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/Nevow"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Nevow"
+	@echo "# devhelp"
+
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+latexpdfja:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through platex and dvipdfmx..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."
+
+xml:
+	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+	@echo
+	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+pseudoxml:
+	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+	@echo
+	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."