Build your own Ark Dev Kit
A full Ark Dev Kit consists of a screen, battery, micro-sd card, compute module, a case, and the Ark PCB both of which are available to be printed using this Arkive.
How To:
Upload one of these Gerber .zips to a PCB Manufacturer for them to print and deliver the PCBs needed you need to build an Ark Dev Kit. Print the case at home, or upload the files to a 3D printing service.
Notes:
Enabling touch screen
Add Distro/pullup.dtbo to /boot/overlays
Add Distro/touchscreen.dtbo to /boot/overlays
Replace /home/pi/.bashrc with the Distro/.bashrc provided
Make sure you are using the provided Distro/config.txt in /boot/
Enabling buttons
Add Distro/buttons.dtbo to /boot/overlays
Make sure you are using the provided Distro/config.txt in /boot/
Raspberry Pi Compute Module 3L+ (pending transition to CM4 and RISC-V): https://www.raspberrypi.com/products/compute-module-3-plus/
Newhaven Display 4.3" Capacitive Touch (pending transition to OLED and e-ink options]): Mouser #: 763-4.3480272EFASXVC
2500mAh LiPo battery: Mouser #: 485-328
SD Card: Mouser #: 467-SDSDQAD-128G
Made with Love by Humans on Earth